Grundfos ST-55-520, Инструкция по установке и эксплуатации

Страница: 14 / 56

3.2 Handling and lifting the product
S pumps weigh up to 8100 kg without accessories.
It is, therefore, crucial to use the right lifting
equipment.
The pump weight is stated on the nameplate.
Always use CE marked or locally accepted
lifting equipment.
DANGER
Crushing hazard
Death or serious personal injury
‐
Always check the lifting bracket and
chain for corrosion or wear before lift-
ing.
‐
Always lift the pump by the marked lift-
ing points or a forklift truck.
DANGER
Crushing hazard
Death or serious personal injury
‐
Make sure the centre of gravity is be-
tween the forklift arms when lifting the
pump. The approximate centre of grav-
ity is marked with a label attached to
the transport stand.
DANGER
Electric shock
Death or serious personal injury
‐
Never lift the pump by the power ca-
bles.
Lifting the pump by the power cables may result in
electric short circuit and risk of electric shock when
the pump is connected to the main supply. The cables
and cable entries may be damaged, resulting in loss
of water resistance and severe damage to the motor.
If the pump is tilted more than 10° in any direction
from its normal position (EN 809, 5.2.1.4), the pump
may lose its stability.
3.2.1 Lifting points
TM034459
Lifting points on pump, range 72
TM046068
Lifting points on pumps, range 74 and 78
Always lift ST pumps by the lifting bracket
to make sure the pump is balanced.
The design of the lifting bracket may differ from the
one in the drawing. It does not affect the handling of
the product.
14
English (GB)