Grunbeck softliQ:MC, Руководство по эксплуатации

Страница: 40 / 80

Start-up
40 | 80
BA_TD
3-
BM
000e
n_
06
4_sof
tli
Q
-M
C
.docx
6 Start-up
6.1 Starting up the product
The softliQ control unit is operated using keys (refer to chapter 4.3).
The start-up program assists you with starting up the softliQ water softener. You are guided
through the start-up procedure step-by-step on the display.
There are dots on the right of the display. These provide orientation and show you where in
the program you are at present. The current position is shown in a darker colour. Values can
only be changed if the corresponding dot is shown in green. Use the ▲ or ▼ keys to
navigate through the program. Open menus with ENTER.
6.1.1 Initial start-up and automatic start of the start-up program
1. Keep salt tablets (refer to chapter 2.6) handy.
2. Remove the protective film from the display.
3. Plug in the mains plug.
4. Select the required language with ▲ or ▼.
5. Confirm with ENTER.
6. Select the desired hardness unit with ▲ or ▼.
7. Confirm with ENTER.
8. Enter your app password.
You only need your app password if you want to put the product into
operation using the myGrünbeck app. Otherwise, skip this step.