Grunbeck softliQ:MC, Руководство по эксплуатации

Страница: 38 / 80

Installation
38 | 80
BA_TD
3-
BM
000e
n_
06
4_sof
tli
Q
-M
C
.docx
1. Shorten the flushing water hose (outside diameter 12 mm) to the required length.
2. Fasten the flushing water hose (regeneration water flows out under pressure).
3. Shorten the overflow hose (outside diameter 16 mm) to the required length.
4. Run the overflow hose to the drain with a downward slope.
5. Fasten the overflow hose.
6. Make sure there is a free outlet to the drain.
If a water flow pressure of at least 3.0 bar is available, the flushing water
hose can be laid up to max. 2.2 m above the floor level. Then, the connection
of the overflow hose of the brine tank is not possible.
» This completes the installation.
After completion of the installation, slide the protective cover from the packaging over the
water softener. This protects the water softener from contamination until it is started up.