Grunbeck softliQ:MC, Руководство по эксплуатации

Страница: 39 / 80

Installation
39 | 80
BA_TD
3-
BM
000e
n_
06
4_sof
tli
Q
-M
C
.docx
5.3.4 Inputs and outputs of the control unit
The control unit features a voltage-free input and output. These are configured in the installer
level (refer to chapter 4.5).
Item Designation Item Designation
1 Programmable input DigIN 3 Voltage-free fault signal contact Pot.f.S. (NO)
max. 230 V/max. 1 A
2 Voltage-free contact Prog.Out
max. 230 V/max. 1 A
Use the following connection cables tor connection to the programmable input or voltage-
free output of the control unit:
● Flexible cables of quality H03xx F 2x0.5 mm² or comparable for connecting the
programmable input (no. 1), because only voltage-free contacts may be connected.
● Flexible cables of quality H05xx F 2x0.75 mm² or comparable for connecting the
voltage-free output (no. 2), because consumers operated with mains voltage may
be connected.
3
1
2