page 8
Installation instruction
The following conditions have to be satisfied during the installation of this Lubricus Lubrication System, thus it
can be assembled, with other parts, to a complete machine without affecting the safety and health of
humans.
The housing of the Lubricus and/or Lubricus Controller should not be exposed to direct sunlight
and/or radiant heat preventing the formation of condensation.
Electrical connection
Have the electric power supply connected only by a trained electrician!
Connection and wiring of the electric components should be done by an expert trained in this field.
Check the voltage details with the existing power supply voltage!
Maintenance /repair
Disconnect the voltage feed, before starting with
maintenance or repair.
Maintenance and repair
work may only be done with the system shut down.
Check the surface temperature of Lubricus Lubrication System, due to danger of burning by radiant heat.
Always wear heat-resistance gloves! Protect the system from activation during maintenance and repair work!
