page 4
Lubricus Lubrication System
Important remark: unused exits cannot be closed and must remain open to avoid damage to the Lubricus
Lubrication System!
Lubricus Controller
Connection Lubricus Controller
Ventilation Lock & programming key
(The programming key is conveniently stored on top of
the clear housing, to remove the key for Setup or
Adjustments of your Lubricus (Simply turn clockwise to
release key)
The point of the key is used for programming.
Please note: Always replace the key for safe keeping
as this also forms part of the cover.
Cover for cartridge
Display showing adjustment
values and error messages
Sensor for Activation and programming key
Connector pin M12 x 1 = connection to plc +
power supply 24 VDC
LED: Status indicator
4 Outlets for Lubricus,
Connector pin M8 x 1
