page 7
Safety information for operators/operating staff
Hot or cold machine parts are hazardous and must be protected from touching. The protection on
"moving or rotating parts" must not be removed.
In case of leakages of dangerous media proper disposal not endangering environment and people must
be ensured.
Legal Regulation must be observed and complied.
Eliminate any danger due to electrical power.
Safety information for maintenance, inspection and assembly work
All
maintenance, inspection
and installation work
may only be carried out
by trained specialists
who
have been informed appropriately by studying the user information closely.
All work
must only be carried out when
machine is shut down
and while wearing appropriate
protective
clothing
. Always comply with the procedures for shutting the machine down that are described in the
operating manual. All the safety and protective equipment must be replaced immediately after completing
work. Environmentally hazardous substances that endanger the environment must be disposed in
accordance with local regulations. Secure the system during maintenance and repair work, against
intentional or unintentional operation. Dispose of used lubricants in accordance with the safety data sheets of
the lubricant manufacturer.
Alterations and manufacture of spare parts without authority
Rebuilding or altering the Lubricus Lubrication System is only allowed after consultation with the
manufacturer.
Original spare parts
and accessories authorized by the manufacturer are for
safety
purposes. Using other parts results in loss of liability for claims resulting out of this. For components,
retrofitted by the operator, the manufacturer does not assume guarantee nor claims for damages.
Prohibited methods of operation
Operational security of the Lubricus Lubrication System is only guaranteed if it
is operated in accordance with the
operating instructions
. The limit values stated in the technical data must not be exceeded under any circumstances.
General risk reference
All components of the system are designed in accordance with the prevailing regulations of the construction
of technical machines, in regards to operational safety and accident prevention. Operation outside of these
constraints can lead to dangers for the user respectively third persons or other technical facilities. The
Lubricus Lubrication System therefore may fulfil only in
technically fault-free condition
its intended use.
This may only be carried out under compliance of the safety regulations and the attention of the operator's
manual.
Therefore please
regularly inspect
the pump and its attachments for possible
damage
or
leaks
.
Transport and storage
Use suitable lifting gear for transport.
Do not throw or expose the Lubricus Lubrication System to strong shock loads.
Store the Lubricus Lubrication System in a cool and dry place to avoid corrosion of the system’s individual parts.
Pay attention to the current safety- and accident prevention instructions during the transport. Wear suitable
protection equipment if necessary!
