33
6.3.7 PRO menu: operating mode = hour mode -h-
The PRO menu allows you to change the settings of LUB-V's dispensing behavior as
well as the operation mode. You can change the pause time h and the number of cycles
c (number of strokes). Furthermore you can switch from the operation mode hour mode
-h- to the operation mode pulse control mode PUL, see chap. 6.3.8.
After pause time h has expired LUB-V executes exactly the number of strokes c (each
0.16 cm³) specified in the number of cycles c.
There is no fault or error at LUB-V.
Being in PRO menu the first step is to set the pause time h and afterwards the number
of cycles c; direct access to the number of cycles c is not possible.
l
Remove the activation and programming key from the top of LUB-V and place
it onto the action area. Hold the activation and programming key onto the action surface.
Leave the activation and programming key on the action area until PRO is displayed in
the LCD.
l
Remove the activation and programming key from the action area as long as PRO is
displayed.
Ü
The LCD and the green LED flash twice. The LCD first displays the value of pause
time h (h
is
) currently set. Now you are able to change the values of pause time h.
