manualshive.com logo in svg

Gruetzner LUB-V, Руководство пользователя

Поделиться
Скачать
Gruetzner LUB-V Скачать руководство пользователя страница 31

31

6.3.5  INF menu: operating mode = pulse control mode PUL

The INF menu is used to inform the user about the firmware used in LUB-V and the 

settings which have been made earlier and are currently active.

In INF menu nothing can be changed by the user. The values of the parameters are 

displayed in a fixed order.

n 

alphanumerical name of the LUB-V firmware

PUL 

set operating mode: impulse mode (PUL)

c 

value of the number of cycles c (irrelevant in pulse control mode)

l

Remove the activation and programming key from the top of LUB-V and place it onto 

the action area.

l

Hold the activation and programming key on the action surface. The yellow LED lights 

up. Leave the activation and programming key on the action area until INF is displayed 

in the LCD. Remove the activation and programming key from the action area as long as 

INF is displayed. The yellow LED disappears; the LCD and the green LED flash twice.

Ü

 The LCD informs you on the set values.

l

Insert the activation and programming key into the hole provided on top of LUB-V.

 The INF menu can only be accessed from OFF mode (LUB-V is switched off). When 

you have entered the INF menu, you will return to OFF mode.

Содержание LUB-V





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды