Groeneveld BreakAlube-3, Общее руководство

Страница: 5 / 36

5 F600775R00 General information
General Manual
Release date: September 2014
2. GENERAL INFORMATION
2.1 Introduction
With a Groeneveld automatic greasing system, the hydraulic hammer is automatically lubri-
cated with exactly the right amount of grease at just the right moment. In addition, optimum
grease distribution is attained over the whole surface to be lubricated, this is possible be-
cause the hydraulic hammer is lubricated while it is operational. All actions are automatically
performed by the system. The operator needs only to ensure the periodic topping up of the
grease reservoir.
Groeneveld’s automatic greasing system has been thoroughly tested to guarantee a long and
trouble-free service life, even under severe operating conditions.
Besides correct installation and the use of the prescribed type of grease, a periodic check
of the operation is a condition for the continued good functioning of the system. This peri-
odic check is easy to carry out and can be done together with the usual maintenance of the
machine. Partly through a careful choice of materials, the automatic greasing system proper is
practically maintenance-free.
ATTENTION
The use of an automatic greasing system eliminates a large proportion of
the time-consuming work of manual lubricating. Do not forget, howev-
er, that there are still lubrication points that do have to be lubricated by
hand.