Grizzly T32006, Руководство пользователя

Страница: 16 / 32

Model T32006 (Mfd. Since 01/20) -16
-
SECTION 5: OPERATIONS
If you are not experienced with this
type of tool, WE STRONGLY REC-
OMMEND that you seek additional
training outside of this manual.
Read books/magazines or get for-
mal training before beginning any
projects. Regardless of the content
in this section, Grizzly Industrial
will not be held liable for accidents
caused by lack of training.
To reduce risk of eye or face inju-
ry from flying chips, always wear
safety glasses and a face shield
when operating this tool.
To complete a typical operation, the
operator does the following:
1. Examines workpiece to make sure it is
suitable for drilling.
2. Put on required safety glasses and face
shield.
3. Firmly secures workpiece to table using
vise or clamp.
4. Installs correct drill bit or cutting tool for
operation.
5. Adjusts headstock to correct height,
then locks it in place.
6. Connects tool to power, and turns tool
ON.
7. Selects appropriate spindle speed.
8. Performs drilling operation.
9. When finished, turns tool OFF and dis-
connects it from power.
Due to the generic nature of this overview,
it is
not intended to be an instructional
guide. To learn more about specific opera-
tions, read this entire manual, seek addi-
tional training from experienced machine
operators, and do additional research
outside this manual by reading "how-to"
books, trade magazines, or websites.
Operation Overview
The purpose of this overview is to pro-
vide the novice tool operator with a basic
understanding of how the tool is used
during operation, so the tool controls/com-
ponents discussed later in this manual are
easier to understand.
To reduce your risk
of serious injury, read
this entire manual
BEFORE using tool.