Grizzly T1244, Руководство пользователя

Страница: 17 / 32

Model T1244 (Mfd. Since 10/17)
-15-
Attaching Router to
Extension Wing
The universal aluminum router mounting plate
included with the T1244 is designed to attach to
the bottom of your router in the same manner as
the router base. When installed, the weight of the
router holds the mounting plate in place.
We recommend using the router base as a
template for the hole pattern to be drilled in the
mounting plate. The router mounting plate has 15
pre-marked pilot holes to assist in attaching it to
the router.
IMPORTANT: When deciding how to orient the
router in relation to the router wing table, consider
access to all router controls, adjustment knobs,
lock levers, and the power switch.
Router attachment requires permanent
modification of your router table mounting
plate! Before attaching router, thoroughly
read procedure below and make sure you
can perform the required tasks.
To attach router to router mounting plate:
1. DISCONNECT ROUTER FROM POWER!
2. Mark front of mounting plate with tape or
erasable marker.
3. Lift mounting plate out of table opening, and
lay it bottom-side-up on a protected working
surface to prevent scratching top surface of
mounting plate.
Straightedge Mounting Plate
Table Surface
Set
Screw
Set
Screw
Insert
Set
Screw
Set
Screw
Figure 21. Straightedge inspection pattern to
ensure mounting plate is flush with table.
11. To ensure that workpiece does not catch on
mounting plate or table insert, inspect align-
ment with straightedge in star pattern shown
in
Figure 21, ensuring both ends of straight-
edge are over table. Adjust (4) set screws as
necessary until top of mounting plate is flush
with surface of router table extension wing.
12. To attach fence assembly, place hex bolt
heads into slots on router table extension
wing, then slide fence assembly toward T-slot
(see
Figure 22). Tighten knobs on fence
bracket to secure.
Figure 22. Fence assembly installed on router
table wing extension.
Fence
Assembly
Fence
Mounting
Slots
T-Slot