Grizzly MTS 43 AC E2, Перевод оригинальной инструкции по эксплуатации, Страница: 130 / 244

130
GB
Technical Specifications
Engine . Single-cylinder two-stroke engine
Fuel Mix ............................................. 40:1
Engine capacity ............................. 43 cm³
Max. engine power ...................... 1.25 kW
Engine tick over speed .............. 3000 rpm
Max. shaft speed ..................... 11000 rpm
Engine speed at recommended
max. shaft speed ....................... 8000 rpm
Fuel consumption at
max. engine power ...................0.534 kg/h
Spec. fuel consumption ...... 0.630 kg/kWh
Tank capacity ............................. 1200 cm³
Weight (no cutting tool,
Empty tank) ...................................7.62 kg
Metal cutting blade
Cutting radius ........................... 230 mm
Threads
Cutting radius ........................... 460 mm
Thread thickness ....................... 2.5 mm
Thread length ..........................2 x 3.2 m
Sound pressure level
(L
pA
) ............... 103 dB (A), KpA=1 dB(A)
Sound power level (L
wA
)
Guaranteed ........................... 113 dB(A)
Measured .........112 dB(A); K
wA
=1 dB(A)
Vibration (a
h
) ...........9.3 m/s
2
, Kn=3.7 m/s
2
Technical and visual changes may be
made without notice in the course of de-
velopment. All dimensions, information
and specifications in these operating in -
structions are therefore subject to change.
Legal claims made on the basis of the
operating instructions can therefore not be
enforced.
Repair Service
• Repairs not covered by the guarantee
can be carried out by our service cen-
tre for a fee. Our service centre will be
happy to produce a cost estimate for
you.
We can handle only equipment that is
sent in with adequate packaging and
postage payment.
• Caution: Please do not hand in de-
fective appliances with fuel or oil still
in the tanks. Always empty the tanks
beforehand. Material damage (oil/fuel
escaping when the appliance is put on
the side or held upside down!) or fire
damage during transport will be at the
sender‘s expense.
In case of complaint or service, please
send your equipment cleaned and
with an indication of the fault to our
service address.
Equipment sent freight collect – as
bulky goods, by express or other
special freight – will not be accept -
ed.
• We will dispose of the defective equip-
ment sent to us, free of charge.