Grizzly MTS 43 AC E2, Перевод оригинальной инструкции по эксплуатации, Страница: 115 / 244

115
GB
is regarded as improper use. The user
alone – and definitely not the manu -
facturer – is responsible for property
and personal damage resulting from
such improper use.
The manufacturer cannot be held li-
able if machines from the same are
modified or used improperly and dam -
age occurs as a result.
Caution! A certain residual risk, which
cannot be eliminated, always remains
even in the case of proper use of the
tool. The following potential hazards
can be derived from the type and de-
sign of the tool:
• Contact with the unprotected cutting
head (cuts).
• Reaching into the scythe when it is
running (cuts).
• Hearing damage if no appropriate pro-
tection is worn.
• Dust and gas formation that is harmful
to health if the equipment is used in
enclosed spaces (nausea).
Additional Safety Regulations
1. Caution! Always keep hands and feet
away from the cutting area, particu-
larly when starting the equipment.
Always keep the hand on the extra
handle free.
2. Always hold the equipment with both
hands on the multifunction handle.
Always keep the equipment at an
appropriately safe distance from the
body and assume a stable body posi-
tion. Always use the carrying strap.
3. Always wear safety goggles.
4. Use the equipment only in daylight or
with the option of good artificial light -
ing.
5. Do not use the equipment in the rain
or on damp grass.
6. Before use or after an impact, check
the equipment for possible damage;
repair if necessary.
7. Do not use the equipment if the safety
devices are damaged or not correctly
installed.
8. Ensure that the engine ventilation
slots, protective cover and cutting
device are always free of dirt or resi-
dues.
9. During the work processes, always
ensure that there are neither people
nor animals within a radius of at least
15 m. Switch off the equipment im-
mediately if anyone and particularly a
child comes into the range of the ma-
chine.
When using the equipment, stones
and other elements that can cause
serious injuries can be thrown out.
10. When the equipment is in operation,
keep away from the moving parts (in
the area of the cutting devices).
After switching off, the cutting head
continues to turn for a few seconds.
11. Before using the equipment, remove
stones, twigs and any other solid ma-
terial from the working area.
Start the machine only as described in
the instructions. It must not be turned
upside down or be in the working po-
sition when it is started.
Do not cross gravel roads or paths
with the equipment running.
12. The greatest care is required when
extending the cutting thread. Risk of
injury from cuts. After executing these
processes, reassume the correct
working position before switching on
the equipment.
13. Do not use metallic cutting reels or
saw blades. Note that the equipment
remains in operation for a few sec-
onds after the switch is released.