Grizzly G0894 Скачать руководство пользователя страница 32 | Manualshive

Страница: 32 / 48

background image

-30-

Model G0894 (Mfd. Since 05/19)

Many advanced functions of the G0894 are turned
off by default. Notably, S and F letter addresses
are ignored until turned on in the controller.

Most advanced settings are accessible through
the "AUTO PRO SETUP" menu.

Changing Advanced

Settings

Changing advanced settings will change the

default functions of your machine and how

it processes files. Changing advanced set-

tings is only recommended for experienced

operators. After changing settings, monitor

machine operation carefully to prevent dam-

age to the machine, workpiece, or cutter.

To turn on F-code processing:

1. Press MENU, then scroll to "AUTO PRO

SETUP" and press OK.

2. Scroll to "G Code Setup" and press OK.

3. Scroll to "F Read" and press RUN/PAUSE.

"Ign F" will change to "Read F". Press OK to
save.

To turn on S-code processing:

1. Press MENU, then scroll to "AUTO PRO

SETUP" and press OK.

2. Scroll to "G Code Setup" and press OK.

3. Scroll to "S Read" and press RUN/PAUSE.

"Ign S" will change to "Read S". Press OK to
save.

All the basic controls of the G0894 are performed
through single-button commands on the control-
ler, but some advanced features require multi-
button commands to access.

Using Advanced

Controls

Advanced tool functions are accessed through the
advanced processing menu. Functions include
array work, resuming stopped jobs, surfacing a
workpiece, calculating bounds of a file, and calcu-
lating processing time of a file.

To access advanced processing menu:

1. Hold down RUN/PAUSE, then press HIGH/

LOW and release buttons together.

Advanced Processing Menu

Up to nine work coordinate systems can be saved
at a time. When work origin is set, it is set for the
active coordinate system. If the absolute coordi-
nate system is active, work origin cannot be set.

To access advanced processing menu:

1. Hold down MENU, then press one 0-9 num-

ber button and release buttons together.

— Press MENU + 0 to activate absolute coor-

dinate system (mechanical coordinates).

— Press MENU + 1-9 to activate work coor-

dinate systems.

Switching Coordinate Systems

— Press Y+ and Y- during operation to

manually change spindle ratio. Spindle
ratio ranges from 0.1 (stopped) to 1.0 (full
speed).

— Press STOP to completely stop operation.

Choose  between  "Save  break"  to  save
breakpoint  to  return  to  later,  or  "Discard
break"  to  stop  operation  without  saving.
Resume  saved  processing  through  the
advanced  processing  menu  (see

Using

Advanced Controls on this page).

«
...
30
31
32
33
34
...
»

Содержание G0894

















































Отзывы:

Нет отзывов

Похожие инструкции для G0894

Бренд: parktool Страницы: 2

Бренд: NSI Solutions Страницы: 10

Бренд: Performance Tool Страницы: 6

EHR 20 / 2.6 S SET

Бренд: EIBENSTOCK Страницы: 64

Бренд: HARDELL Страницы: 8

Бренд: Fein Страницы: 58

Бренд: Fein Страницы: 30

Бренд: Worldwide Страницы: 2

Бренд: MasterCraft Страницы: 30

Бренд: YATO Страницы: 72

Бренд: KEPCO Страницы: 12

Бренд: Valcom Страницы: 2

Бренд: Ratio Страницы: 36

munigraf A2M 200

Бренд: Alfamacchine Страницы: 29

Бренд: Baileigh Industrial Страницы: 20

Бренд: Worcraft Страницы: 32

Powerplant Junior

Бренд: Harley Benton Страницы: 20

Бренд: Hamron Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды