Grizzly G0894 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 48

background image

Model G0894 (Mfd. Since 05/19)

-29-

Uploading and

Running G-Code

To load G-code onto controller:

1. Turn machine ON.

2. Insert USB drive loaded with G-code into

controller (see

Figure 23).

2. Run post-processing application to export

G-code.

Note:

Use

post-processing options specific

to the Model G0894 or the RichAuto A11
controller when available. If a post-processor
for this machine isn't available, use a post-
processor with minimal formatting.

3. Do a practice run within software to identify

any areas of concern (double-check feed/
speed rates, depth of cut, and the direction
the cutter will be traveling).

4. Review G-code and simplify code if needed.

5. Export G-code to USB drive in .NC, .TAP, or

.TXT format.

Before operations can be run on the Model
G0894, a toolpath must be designed and con-
verted to G-code.

CAM software converts a CAD model into G-code,
which defines a toolpath for the project, and then
formats the G-code into a machine specific dialect
via a post-processor.

This machine does not read advanced formatting
By default, it only runs letter addresses for simple
axis movement. Review

Changing Advanced

Settings on Page 30 for information about turning
on additional G-code functions.

An  operator  could  also  write  G-code  manually.
Often,  this  is  more  efficient  than  designing  and
processing through CAD/CAM. In addition, knowl-
edge  of  G-code  is  integral  to  refining  toolpaths
produced by CAM software.

Creating G-Code File

Items Needed

Qty

CAD/CAM Software or text editor ...................... 1
USB Drive .......................................................... 1

To create G-Code:

1. Load CAD file into CAM software. Take into

consideration what type of material will be cut
and what type of cutter will be used. Make
note of where you will place clamps.

To run G-code:

1. Press RUN/PAUSE.

2. Scroll to "Internal File" and press OK, then

scroll to G-code file and press OK. The
screen will display "Set Work Param".

— To change a work parameter, scroll to the

parameter and press "RUN/PAUSE", then
input the new value and press OK to save.

3. Press OK to begin operation.

— Press RUN/PAUSE to pause axis move-

ment.  Spindle  will  continue  to  spin.  Axes
can  be  manually  moved  while  paused.
Press RUN/PAUSE again to resume, then
OK  to  resume  from  new  axis  position,  or
STOP to return to original position.

Figure 23. USB drive connected to controller.

USB

Drive

Controller

3. Press MENU, then scroll to "Operate File" on

the controller and press OK.

4. Scroll to "Copy File" and press OK.

5. Scroll to "Udisk File" and press OK, then

navigate to G-code file and press OK.

«
...
29
30
31
32
33
...
»

Содержание G0894

















































Отзывы:

Нет отзывов

Похожие инструкции для G0894

Бренд: Cairox Страницы: 8

Бренд: RAMSET Страницы: 16

Бренд: M/A-Com Страницы: 38

Бренд: V-TAC Страницы: 16

Бренд: ZALMAN Страницы: 7

Бренд: Feider Machines Страницы: 15

Бренд: Pepperl+Fuchs Страницы: 26

YS6801-UC/SM-SO301

Бренд: Yolink Страницы: 24

Бренд: Ferm Страницы: 112

Бренд: TDK-Lambda Страницы: 2

Бренд: Oemtools Страницы: 4

Бренд: BGS technic Страницы: 8

Бренд: Moser Systemelektrik Страницы: 6

Бренд: Astro Pneumatic Tool Страницы: 2

Carlyle Tools 6-711A

Бренд: Napa Страницы: 16

GEN 10-330 ABCDE

Бренд: TDK-Lambda Страницы: 96

Mini Iso-Brick M239

Бренд: mxr Страницы: 5

Clincher Fence Machine

Бренд: JoinTech Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды