Grizzly G0860 Скачать руководство пользователя

Страница: 54 / 60

-54-

Model G0860/G0861/G0862 (Mfd. Since 10/18)

BUY PARTS ONLINE AT GRIZZLY.COM!

Scan QR code to visit our Parts Store.

G0860

grizzly.com

MODEL G0860

1.5 HP CYCLONE

DUST COLLECTOR

WARNING!

To reduce the risk of serious injury when using this machine:

1. Read and understand owner’s manual before operating.

2. Always wear approved eye protection and respirator.

3. Properly ground machine—connect to permanently

grounded metal wiring system or equipment-grounding

conductor.

4. Only use this machine to collect wood dust/chips;

never use to collect glass, metal, liquids, asbestos, silica,

animal parts, biohazards, burning material/ashes, etc.

5. Always disconnect power before servicing or cleaning.

6. Do not expose to rain or wet areas.

7. Keep hands, long hair, and loose clothing away from inlet.

8. Never leave machine unattended during operation.

9. Do not use if power supply wires, conduit, or any other

electrical equipment becomes damaged—promptly repair!

10. Do not use without dust bag or filters in place.

11. Always wear a respirator when emptying bags.

12. Do not modify machine in any way.

13. Prevent unauthorized use by children or untrained users.

Motor: 1.5 HP, 110V, Single-Phase, 60 Hz

Full-Load Current Rating: 15A

Suction Capacity: 868 CFM @ 1.8" SP

Max. Static Pressure: 9.7"

Inlet Size: 6"

Collection Drum Size: 20 Gallons

Filter Performance: 99.9% at 0.2 – 1 Micron

Cartridge Filter: 14-1/2" x 24"

Replacement Filter: T30314

Replacement Filter Bag: T27900

Replacement Drum Bag: T27974

Weight: 265 lbs.

Specifications

Mfd. for Grizzly in Taiwan

Date

Serial #

To reduce risk of death

or serious injury, read

manual BEFORE using

machine.
To get a new manual,

call (800) 523-4777 or

go to www.grizzly.com.

WARNING!

EYE/LUNG INJURY

HAZARD!

Always wear safety

glasses and a

respirator when

using this machine.

101

103

104

105

106

108
107

102

109

102

G0860/G0861 Labels & Cosmetics

REF PART #

DESCRIPTION

REF PART #

DESCRIPTION

101

P0860101

MACHINE ID LABEL (G0860)

105

P0860105

EYE/EAR/LUNG WARNING LABEL

101

P0861101

MACHINE ID LABEL (G0861)

106

P0860106

GRIZZLY.COM LABEL

102

P0860102

ELECTRICITY WARNING LABEL

107

P0860107

TOUCH-UP PAINT, GRIZZLY BEIGE

103

P0860103

MODEL NO. LABEL (G0860)

108

P0860108

TOUCH-UP PAINT, GRIZZLY GREEN

103

P0861103

MODEL NO. LABEL (G0861)

109

P0860109

GRIZZLY NAMEPLATE-SMALL

104

P0860104

READ MANUAL LABEL

Safety labels help reduce

the risk of serious injury

caused by machine haz-

ards. If any label comes

off or becomes unreadable,

the owner of this machine

MUST replace it in the origi-

nal location before resum-

ing operations. For replace-

ments, contact (800) 523-

4777 or www.grizzly.com.

Содержание G0860





























































Результаты поиска

Содержание G0860

Отзывы:

Похожие инструкции для G0860

Бренды по названию

Популярные бренды

Grizzly G0860, Руководство пользователя

Результаты поиска

Содержание G0860

Отзывы:

Похожие инструкции для G0860

Бренды по названию

Популярные бренды