Model G0860/G0861/G0862 (Mfd. Since 10/18)
-45-
Emptying/Replacing
Collection Drum Bag
Items Needed Qty
Drum Bag T27974 (Models G0860, G0861) ...... 1
Drum Bag T28454 (Model G0862) .................... 1
To remove and replace collection drum bag:
1. DISCONNECT MACHINE FROM POWER!
2. Lift drum lock handle to lower collection drum
onto casters (see
Figure 73).
3. Release both latches on sides of drum, then
roll drum clear of drum lid (see
Figure 73).
Dispose of the collection drum bag when dust fills
it
3
⁄
4
full. Replace the bag if it develops a leak or
becomes damaged.
7. Vacuum loose dust inside impeller housing
and on machine.
8. Reverse Steps 2–6 to re-assemble.
6. With assistant holding canister filter from
below, loosen and remove (6)
5
⁄
16
"-18 x
3
⁄
4
"
flange bolts securing canister filter assembly
to impeller housing (see
Figure 72).
Figure 72. Remove flange bolts to remove
canister filter assembly from impeller housing.
4. Lift bag out of drum and dispose of contents.
IMPORTANT: To contain wood dust and min-
imize risk of exposure, tie bag closed before
disposal.
5. Place new dust bag inside collection drum,
and fold excess bag length over top of drum.
6. Move collection drum under lid and latch it
closed.
7. Press drum lock handle down to lift collection
drum off casters for operation.
Figure 73. Collection drum bag components.
Latch
(1 of 2)
Drum Lid
Drum Lock
Handle
Drum Bag
x 6
Dust exposure created
while using machinery
may cause cancer, birth
defects, or long-term respi-
ratory damage. Always
wear goggles and a NIOSH-
approved respirator when
working with the dust col-
lection bags or canisters.
