-22-
Model G0860/G0861/G0862 (Mfd. Since 10/18)
8. Fully tighten all fasteners installed in Steps
2–4 (see Figures 10–11).
9. Have an assistant align intake barrel so dust
port points straight out from impeller housing
(see
Figure 14), then attach to impeller hous-
ing with (8)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts.
Note: For G0860 and G0861, align dust port
on right. For G0862, align dust port on left.
6. Secure impeller housing to support legs with
(8)
5
⁄
16
"-18 x
3
⁄
4
" button head cap screws and
(8)
5
⁄
16
" fender washers (see
Figure 13).
7. Secure impeller housing to lock handle
guides with (4)
5
⁄
16
"-18 x
1
⁄
2
" flange bolts (see
Figure 13).
5. With help of two assistants, lift impeller hous-
ing and set it on support legs and lock handle
guides (see
Figure 12).
10. Attach cyclone funnel to intake barrel, as
shown in
Figure 15, using (8)
5
⁄
16
"-18 x
3
⁄
4
"
flange bolts and (8)
5
⁄
16
"-18 flange nuts.
Figure 15. Attaching cyclone funnel to intake
barrel.
x 8
Cyclone
Funnel
Intake
Barrel
Figure 14. Intake barrel attached to impeller
housing.
x 8
Intake
Barrel
Once installed, the impeller housing makes
the machine top heavy. Assistants must
securely hold the impeller housing in place
until Steps 5–7 are completed.
Figure 13. Impeller housing attached to support
legs and lock handle guides.
x 8
x 4
Figure 12. Impeller housing sitting on support
legs and lock handle guides.
Impeller
Housing
Lock
Handle
Guides
Support
Legs
