Grizzly G0850, Руководство пользователя

Страница: 19 / 56

Model G0850 (Mfd. Since 01/19)
-17-
5. Attach (2) rear legs (35
1
⁄
2
" long) to base stand
and finger-tighten each one with (2)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts and (2)
5
⁄
16
" fender washers (see
Figure 14).
Figure 14. Left and right lower rear legs
installed.
x 4
Left Leg
6. Attach lower center leg to base stand with
flange facing outward, as shown in Figure
15, then finger-tighten with (2)
5
⁄
16
"-18 x
3
⁄
4
"
hex bolts and (2)
5
⁄
16
" fender washers.
Figure 15. Lower center leg installed.
x 2
Flange
Faces
Outward
7. Attach lower center leg bracket, as shown in
Figure 16, and finger-tighten using (2)
5
⁄
16
"-18
x
3
⁄
4
" hex bolts and (2)
5
⁄
16
" fender washers.
8. Attach left and right leg braces to lower legs,
as shown in Figure 17, and finger-tighten
each one using (4)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts and
(4)
5
⁄
16
" fender washers per brace.
Note: Right leg brace has a threaded
5
⁄
16
"-18
bolt hole (circled) to mount control panel.
Figure 16. Lower center leg bracket installed.
x 2
Figure 17. Left and right leg brackets attached
to lower legs.
x 8
Left Leg Brace
9. Find (2) upper legs (33
1
⁄
4
" long) without addi-
tional threaded holes on narrow edges and
set aside.
Note: The two upper legs with additional
threaded holes on the narrow edge are used
in
Steps 11–12.
10. Attach each leg to left leg brace using (2)
5
⁄
16
"-
18 x
3
⁄
4
" hex bolts and (2)
5
⁄
16
" fender washers
(see Figure 18). Finger-tighten for now.
Figure 18. Upper legs placed in left leg brace.
x 4
Lower
Center
Leg
Bracket
Lower
Center
Leg
Left Leg
Brace
Lower
Center
Leg
Right
Leg
Right Leg Brace
Upper
Legs