Grizzly G0850, Руководство пользователя

Страница: 25 / 56

Model G0850 (Mfd. Since 01/19)
-23-
Figure 39. Filter bags attached to canister filters.
47. With help from an assistant, attach outer filter
muffler to impeller housing using (3)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts and (3)
5
⁄
16
" fender washers (see
Figure 40).
48. Align slots on outer filter muffler with (6) knob
bolts, then tighten knob bolts to secure outer
and inner filter mufflers (see
Figure 40).
50. For each 1
1
⁄
2
" vacuum hose, place 1
3
⁄
4
" clamp
on each end of hose, then secure hose to
cyclone funnel port and vacuum hose brack-
et. Tighten all four clamps (see
Figure 42).
51. Attach control panel to right leg brace and
upper front leg using (2)
5
⁄
16
"-18 x
3
⁄
4
" hex bolts
and (2)
5
⁄
16
" fender washers (see
Figure 43).
49. Attach (2) vacuum hose brackets onto stand
base, as shown in Figure 41, using (4)
5
⁄
16
"-
18 x
3
⁄
4
" hex bolts and (4)
5
⁄
16
" fender washers.
Figure 42. Vacuum hose attached to cyclone
funnel and vacuum hose bracket.
1
1
⁄
2
" Vacuum
Hose
Figure 43. Control panel attached to right leg
brace and upper front leg.
x 2
Figure 40. Outer filter muffler installed.
Outer
Filter
Muffler
x 6
x 3
Figure 41. Vacuum hose brackets installed.
x 4
Vacuum Hose Brackets
45. Repeat Steps 42–44 for right filter brush
motor.
46. With help from an assistant, place 17" x 24"
filter bag around bottom of each canister filter
and secure with clamp (see
Figure 39).
Clamp
Filter
Bag
Cyclone
Funnel
Vacuum
Hose
Bracket