Grizzly G0821, Руководство пользователя

Страница: 19 / 52

Model G0821 (Mfd. Since 03/18)
-17-
Bench Mounting
Figure 9. Typical "Direct Mount" setup.
Machine Base
Workbench
Lag Screw
Flat Washer
Another option is a "direct mount" (see example
below) where the machine is secured directly to
the workbench with lag screws and washers.
The base of this machine has mounting holes
that allow it to be fastened to a workbench or
other mounting surface to prevent it from moving
during operation and causing accidental injury or
damage.
The strongest mounting option is a "Through
Mount" (see example below) where holes are
drilled all the way through the workbench—and
hex bolts, washers, and hex nuts are used to
secure the machine in place.
Machine Base
Workbench
Hex
Bolt
Flat Washer
Flat Washer
Lock Washer
Hex Nut
Figure 8. Typical "Through Mount" setup.
Number of Mounting Holes ............................ 4
Dia. of Mounting Hardware Needed ..........
5
⁄
16
"
Assembly
1. Use (2) M8-1.25 x 30 cap screws, (2) 8mm flat
washers, and (2) 8mm lock washers to attach
carriage support to jointer (see
Figure 10).
2. Insert locking plate assembly into carriage
support, so locking plate pins are against
bottom edge of carriage support (see
Figure
11). Then attach fence carriage lock lever
and 10 x 3.5mm beveled washer to locking
plate assembly, as shown in
Figure 12 on
Page 18).
Figure 11. Inserting locking plate assembly.
Locking
Plate Pins
Locking Plate
Assembly
Figure 10. Attaching carriage support to bed
assembly.
Carriage Support
x 2
Cap Screws
The machine must be fully assembled before it
can be operated. Before beginning the assembly
process, refer to
Needed for Setup and gather
all listed items. To ensure the assembly process
goes smoothly, first clean any parts that are cov-
ered or coated in heavy-duty rust preventative (if
applicable).