-6-
Model G0810 (Mfd. Since 10/15)
Machine Data Sheet
The information contained herein is deemed accurate as of 8/8/2016 and represents our most recent product specifications.
Due to our ongoing improvement efforts, this information may not accurately describe items previously purchased.
PAGE 1 OF 2
Model G0810
MACHINE DATA
SHEET
Customer Service #: (570) 546-9663 · To Order Call: (800) 523-4777 · Fax #: (800) 438-5901
MODEL G0810 16" DRILL PRESS WITH CROSS‐SLIDE
TABLE AND POWER FEED
Product Dimensions:
Weight.............................................................................................................................................................. 662 lbs.
Width (side-to-side) x Depth (front-to-back) x Height..................................................................... 42 x 39-1/2 x 65 in.
Footprint (Length x Width)............................................................................................................................ 26 x 19 in.
Space Required for Full Range of Movement (Width x Depth)........................................................ 56-1/2 x 39-1/2 in.
Shipping Dimensions:
Type.......................................................................................................................................................... Wood Crate
Content........................................................................................................................................................... Machine
Weight.............................................................................................................................................................. 685 lbs.
Length x Width x Height....................................................................................................................... 30 x 33 x 69 in.
Must Ship Upright................................................................................................................................................... Yes
Electrical:
Power Requirement........................................................................................................... 220V, Single-Phase, 60 Hz
Full-Load Current Rating..................................................................................................................................... 11.5A
Minimum Circuit Size.............................................................................................................................................. 15A
Connection Type....................................................................................................................................... Cord & Plug
Power Cord Included.............................................................................................................................................. Yes
Power Cord Length................................................................................................................................................. 6 ft.
Power Cord Gauge......................................................................................................................................... 14 AWG
Plug Included.......................................................................................................................................................... Yes
Included Plug Type................................................................................................................................................ 6-15
Switch Type.................................................................................................................... ON/OFF Push Button Switch
Motors:
Main
Type................................................................................................................. TEFC Capacitor-Start Induction
Horsepower............................................................................................................................................. 1.5 HP
Phase............................................................................................................................................ Single-Phase
Amps......................................................................................................................................................... 11.5A
Speed................................................................................................................................................ 1720 RPM
Power Transfer .................................................................................................................................. Belt Drive
Bearings..................................................................................................... Shielded & Permanently Lubricated
Main Specifications:
Operation Information
Swing......................................................................................................................................................... 16 in.
Spindle Taper............................................................................................................................................ MT#3
Spindle Travel........................................................................................................................................ 5-1/8 in.
Max. Distance From Spindle to Column................................................................................................ 7-7/8 in.
Max. Distance From Spindle to Table................................................................................................. 19-7/8 in.
Number of Spindle Speeds............................................................................................................................. 12
Range of Spindle Speeds........................................................................................................ 150 – 3000 RPM
Drilling Capacity (Mild Steel)................................................................................................................. 1-1/4 in.
End Milling Capacity................................................................................................................................. 3/4 in.
Face Milling Capacity................................................................................................................................... 3 in.
Содержание G0810
Страница 60: ......
