Grizzly G0796, Руководство пользователя

Страница: 34 / 96

-32-
Model G0796/G0797 (Mfd. Since 1/18)
Positioning
Headstock
Tools Needed Qty
Wrench 19mm ................................................... 1
Wrench 17mm (G0796)...................................... 1
The head tilts 45° forward or backward and
rotates 90° left or right (see
Figures 26–27).
Any time the head has been tilted or rotated, you
must tram the spindle with the table when setting
the headstock back to the 90° position. This is the
only way to ensure precision milling results later.
Refer to
Tramming Spindle, on Page 57 for more
information.
45°
Figure 27. Head rotated to the left.
90°
Figure 26. Head tilted 45° backward.
The head is heavy. When tilting or rotating
head, get help to support its weight as you
make adjustments.
1. DISCONNECT MACHINE FROM POWER!
2. Loosen three lock bolts shown in Figure 28.
3. Use one hand to apply pressure to head
in direction of tilt, then slowly rotate tilt-bolt
shown in
Figure 28.
Note: Rotate tilt-bolt clockwise to tilt head
backward and counterclockwise to tilt it
forward.
Tilting Head Forward/Backward
Figure 28. Head tilt controls.
4. Re-tighten lock bolts.
Lock
Bolts
Tilt-Bolt