Grizzly G0793, Руководство пользователя

Страница: 14 / 60

-12-
Model G0793 (Mfd. Since 02/15)
SECTION 3: SETUP
This machine was carefully packaged for safe
transport. When unpacking, separate all enclosed
items from packaging materials and inspect them
for shipping damage.
If items are damaged,
please call us immediately at (570) 546-9663.
IMPORTANT: Save all packaging materials until
you are completely satisfied with the machine and
have resolved any issues between Grizzly or the
shipping agent. You MUST have the original pack-
aging to file a freight claim. It is also extremely
helpful if you need to return your machine later.
Unpacking
SUFFOCATION HAZARD!
Keep children and pets away
from plastic bags or packing
materials shipped with this
machine.
Inventory
The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
NOTICE
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
The following are needed to complete the setup
process, but are not included with your machine.
Description Qty
•
Additional People ....................................... 1
• Safety Glasses ........................ 1 Per Person
• Cleaner/Degreaser ..................... As Needed
• Disposable Shop Rags ............... As Needed
• Forklift ......................................................... 1
• Lifting Sling (Rated 1500 lbs. Minimum) ..... 1
• Steel Bar Stock 1" x 3' ................................ 1
Needed for Setup
Inventory (Figure 3): Qty
A. Drill Chuck B16 3–16mm ............................ 1
B. Drill Chuck Arbor MT#4–B16 ...................... 1
C. Spindle Sleeve MT#4–MT#3 ...................... 1
D. Spindle Sleeve MT#4–MT#2 ...................... 1
E. Bottle for Oil ............................................... 1
F. Drift Key ...................................................... 1
G. Chuck Key .................................................. 1
H. Toolbox (not shown) ................................... 1
Figure 3. Toolbox inventory.
A
E
D
C B
F
G