Grizzly G0793, Руководство пользователя

Страница: 56 / 60

-54-
Model G0793 (Mfd. Since 02/15)
BUY PARTS ONLINE AT GRIZZLY.COM!
Scan QR code to visit our Parts Store.
Labels & Cosmetics
G0793
grizzly.com
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at
manuals@grizzly.com
.
G0793 Machine Labels B
(12/05/14)
• 1:1 Sizing (Labels are actual size) • Labels must be made of chemical-resistant material
COLOR CODE
GRIZZLY BEIGE
PANTONE 7527 C
167.5 x 44.5mm
367 x 53.5mm
G0793
grizzly.com
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at
manuals@grizzly.com
.
G0793 Machine Labels B
(12/05/14)
• 1:1 Sizing (Labels are actual size) • Labels must be made of chemical-resistant material
COLOR CODE
GRIZZLY BEIGE
PANTONE 7527 C
167.5 x 44.5mm
367 x 53.5mm
G0793 Machine Labels A
(12/05/14)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
Fluid Capacities
Gearhead 4-3/4 qt.
9-1/2 qt.
Coolant
Grizzly T23963 or ISO 32 Equivalent
Varies per Operation/Material
Component Type Capacity
Main Motor: 1-1/8 HP/2 HP, 220V, 3-Ph, 60 Hz
Full-Load Current Rating: 6.6A
Motor Speeds: 875 & 1725 RPM
Swing: 27.5"
Max. Distance Spindle to Column: 13-3/4"
Max. Distance Spindle to Table: 30-3/4"
Spindle Taper: MT#4
Spindle Travel: 7"
Number of Spindle Speeds: 18
Spindle Speed Range: 60 – 1740 RPM
Vertical Table Travel: 20"
Table Swivel Around Column: 360˚
Drilling Capacity Cast Iron: 1-1/2" Dia.
Drilling Capacity Steel: 1-3/16" Dia.
Weight: 1026 lbs.
Specifications
MODEL G0793
HEAVY-DUTY DRILL PRESS
w/AUTO DOWNFEED & TAPPING
Date
S/N
Manufactured for Grizzly in China
105.5 x 166mm
17 x 19mm
54 x 54mm
Fluid Capacities
Gearhead 4-3/4 qt.
9-1/2 qt.
Coolant
Grizzly T23963 or ISO 32 Equivalent
Varies per Operation/Material
Component Type Capacity
S/N
Manufactured for Grizzly in China
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
NOTICE
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVELS BEFORE USING!
DANGER PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005 WARNING
CAUTION PANTONE 109 C
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
COLOR CODES
NOTICE PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
23.5 x 97mm
17 x 19mm
32 x 35.5mm
54 x 54mm
63 x 38mm
64.5 x 148mm
34.5 x 80mm
NOTICE
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
DANGER PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005 WARNING
CAUTION PANTONE 109 C
GRIZZLY LOGO RED PANTONE 711C or RAL 3020
COLOR CODES
NOTICE PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
63 x 38mm
64.5 x 148mm
34.5 x 80mm
G0793 Machine Labels A
(12/05/14)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
Fluid Capacities
Gearhead 4-3/4 qt.
9-1/2 qt.
Coolant
Grizzly T23963 or ISO 32 Equivalent
Varies per Operation/Material
Component Type Capacity
Main Motor: 1-1/8 HP/2 HP, 220V, 3-Ph, 60 Hz
Full-Load Current Rating: 6.6A
Motor Speeds: 875 & 1725 RPM
Swing: 27.5"
Max. Distance Spindle to Column: 13-3/4"
Max. Distance Spindle to Table: 30-3/4"
Spindle Taper: MT#4
Spindle Travel: 7"
Number of Spindle Speeds: 18
Spindle Speed Range: 60 – 1740 RPM
Vertical Table Travel: 20"
Table Swivel Around Column: 360˚
Drilling Capacity Cast Iron: 1-1/2" Dia.
Drilling Capacity Steel: 1-3/16" Dia.
Weight: 1026 lbs.
Specifications
MODEL G0793
HEAVY-DUTY DRILL PRESS
w/AUTO DOWNFEED & TAPPING
Date
S/N
Manufactured for Grizzly in China
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up or servicing.
5. Avoid entanglement with spindle—tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Properly set up machine before starting.
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent rotation.
9. Avoid positioning hands where they could slip into rotating bits.
10. Always remove chuck keys and other tools before starting.
11. Never attempt to slow or stop spindle with hands or tools.
12. Use correct speeds for drilling accessories and workpiece.
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
NOTICE
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVELS BEFORE USING!
DANGER
PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
COLOR CODES
NOTICE
PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at
manuals@grizzly.com.
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
105.5 x 166mm
23.5 x 97mm
17 x 19mm
32 x 35.5mm
54 x 54mm
63 x 38mm
64.5 x 148mm
34.5 x 80mm
G0793 Machine Labels C
(12/05/14)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
7
6
5
4
3
2
1
0
in
Spindle
Stop
Spindle
Start
NOTICE
Do not change spindle speed or
direction when spindle is in motion.
E
M
ER
GENCY ST
O
P
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
COLOR CODES
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
CAUTION
PANTONE 109 C
NOTICE
PANTONE 3005 C or RAL 5005
DANGER
PANTONE 485 C or RAL 3001
358 x 170mm
G0793 Machine Labels A
(12/05/14)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
Fluid Capacities
Gearhead 4-3/4 qt.
9-1/2 qt.
Coolant
Grizzly T23963 or ISO 32 Equivalent
Varies per Operation/Material
Component Type Capacity
Main Motor: 1-1/8 HP/2 HP, 220V, 3-Ph, 60 Hz
Full-Load Current Rating: 6.6A
Motor Speeds: 875 & 1725 RPM
Swing: 27.5"
Max. Distance Spindle to Column: 13-3/4"
Max. Distance Spindle to Table: 30-3/4"
Spindle Taper: MT#4
Spindle Travel: 7"
Number of Spindle Speeds: 18
Spindle Speed Range: 60 – 1740 RPM
Vertical Table Travel: 20"
Table Swivel Around Column: 360˚
Drilling Capacity Cast Iron: 1-1/2" Dia.
Drilling Capacity Steel: 1-3/16" Dia.
Weight: 1026 lbs.
Specifications
MODEL G0793
HEAVY-DUTY DRILL PRESS
w/AUTO DOWNFEED & TAPPING
Date
S/N
Manufactured for Grizzly in China
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up or servicing.
5. Avoid entanglement with spindle—tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Properly set up machine before starting.
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent rotation.
9. Avoid positioning hands where they could slip into rotating bits.
10. Always remove chuck keys and other tools before starting.
11. Never attempt to slow or stop spindle with hands or tools.
12. Use correct speeds for drilling accessories and workpiece.
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
NOTICE
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVELS BEFORE USING!
DANGER PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005 WARNING
CAUTION PANTONE 109 C
GRIZZLY LOGO RED PANTONE 711C or RAL 3020
COLOR CODES
NOTICE PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
105.5 x 166mm
23.5 x 97mm
32 x 35.5mm
63 x 38mm
64.5 x 148mm
34.5 x 80mm
G0793 Machine Labels A
(12/05/14)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
Fluid Capacities
Gearhead 4-3/4 qt.
9-1/2 qt.
Coolant
Grizzly T23963 or ISO 32 Equivalent
Varies per Operation/Material
Component Type Capacity
Main Motor: 1-1/8 HP/2 HP, 220V, 3-Ph, 60 Hz
Full-Load Current Rating: 6.6A
Motor Speeds: 875 & 1725 RPM
Swing: 27.5"
Max. Distance Spindle to Column: 13-3/4"
Max. Distance Spindle to Table: 30-3/4"
Spindle Taper: MT#4
Spindle Travel: 7"
Number of Spindle Speeds: 18
Spindle Speed Range: 60 – 1740 RPM
Vertical Table Travel: 20"
Table Swivel Around Column: 360˚
Drilling Capacity Cast Iron: 1-1/2" Dia.
Drilling Capacity Steel: 1-3/16" Dia.
Weight: 1026 lbs.
Specifications
MODEL G0793
HEAVY-DUTY DRILL PRESS
w/AUTO DOWNFEED & TAPPING
Date
S/N
Manufactured for Grizzly in China
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up or servicing.
5. Avoid entanglement with spindle—tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Properly set up machine before starting.
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent rotation.
9. Avoid positioning hands where they could slip into rotating bits.
10. Always remove chuck keys and other tools before starting.
11. Never attempt to slow or stop spindle with hands or tools.
12. Use correct speeds for drilling accessories and workpiece.
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
NOTICE
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVELS BEFORE USING!
DANGER PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005 WARNING
CAUTION PANTONE 109 C
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
COLOR CODES
NOTICE
PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY!
DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL!
Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at manuals@grizzly.com
.
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
105.5 x 166mm
23.5 x 97mm
17 x 19mm
32 x 35.5mm
54 x 54mm
63 x 38mm
64.5 x 148mm
34.5 x 80mm
G0793 Machine Labels A
(12/05/14)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
Fluid Capacities
Gearhead 4-3/4 qt.
9-1/2 qt.
Coolant
Grizzly T23963 or ISO 32 Equivalent
Varies per Operation/Material
Component Type Capacity
Main Motor: 1-1/8 HP/2 HP, 220V, 3-Ph, 60 Hz
Full-Load Current Rating: 6.6A
Motor Speeds: 875 & 1725 RPM
Swing: 27.5"
Max. Distance Spindle to Column: 13-3/4"
Max. Distance Spindle to Table: 30-3/4"
Spindle Taper: MT#4
Spindle Travel: 7"
Number of Spindle Speeds: 18
Spindle Speed Range: 60 – 1740 RPM
Vertical Table Travel: 20"
Table Swivel Around Column: 360˚
Drilling Capacity Cast Iron: 1-1/2" Dia.
Drilling Capacity Steel: 1-3/16" Dia.
Weight: 1026 lbs.
Specifications
MODEL G0793
HEAVY-DUTY DRILL PRESS
w/AUTO DOWNFEED & TAPPING
Date
S/N
Manufactured for Grizzly in China
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up or servicing.
5. Avoid entanglement with spindle—tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Properly set up machine before starting.
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent rotation.
9. Avoid positioning hands where they could slip into rotating bits.
10. Always remove chuck keys and other tools before starting.
11. Never attempt to slow or stop spindle with hands or tools.
12. Use correct speeds for drilling accessories and workpiece.
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
NOTICE
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVELS BEFORE USING!
DANGER PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005 WARNING
CAUTION PANTONE 109 C
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
COLOR CODES
NOTICE PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at
manuals@grizzly.com.
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
105.5 x 166mm
23.5 x 97mm
17 x 19mm
32 x 35.5mm
54 x 54mm
63 x 38mm
64.5 x 148mm
34.5 x 80mm
G0793 Machine Labels A
(12/05/14)
• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
chemical-resistant material
Fluid Capacities
Gearhead 4-3/4 qt.
9-1/2 qt.
Coolant
Grizzly T23963 or ISO 32 Equivalent
Varies per Operation/Material
Component Type Capacity
Main Motor: 1-1/8 HP/2 HP, 220V, 3-Ph, 60 Hz
Full-Load Current Rating: 6.6A
Motor Speeds: 875 & 1725 RPM
Swing: 27.5"
Max. Distance Spindle to Column: 13-3/4"
Max. Distance Spindle to Table: 30-3/4"
Spindle Taper: MT#4
Spindle Travel: 7"
Number of Spindle Speeds: 18
Spindle Speed Range: 60 – 1740 RPM
Vertical Table Travel: 20"
Table Swivel Around Column: 360˚
Drilling Capacity Cast Iron: 1-1/2" Dia.
Drilling Capacity Steel: 1-3/16" Dia.
Weight: 1026 lbs.
Specifications
MODEL G0793
HEAVY-DUTY DRILL PRESS
w/AUTO DOWNFEED & TAPPING
Date
S/N
Manufactured for Grizzly in China
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up or servicing.
5. Avoid entanglement with spindle—tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Properly set up machine before starting.
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent rotation.
9. Avoid positioning hands where they could slip into rotating bits.
10. Always remove chuck keys and other tools before starting.
11. Never attempt to slow or stop spindle with hands or tools.
12. Use correct speeds for drilling accessories and workpiece.
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
NOTICE
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVELS BEFORE USING!
DANGER PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005 WARNING
CAUTION PANTONE 109 C
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
COLOR CODES
NOTICE PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval. If
artwork changes are required, contact us immediately at manuals@grizzly.com.
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to www.grizzly.com.
WARNING!
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
INJURY/SHOCK
HAZARD!
Disconnect power
before adjustments,
maintenance, or
service.
105.5 x 166mm
23.5 x 97mm
17 x 19mm
32 x 35.5mm
54 x 54mm
63 x 38mm
64.5 x 148mm
34.5 x 80mm
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up or servicing.
5. Avoid entanglement with spindle—tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Properly set up machine before starting.
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent rotation.
9. Avoid positioning hands where they could slip into rotating bits.
10. Always remove chuck keys and other tools before starting.
11. Never attempt to slow or stop spindle with hands or tools.
12. Use correct speeds for drilling accessories and workpiece.
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVELS BEFORE USING!
501
502
503
504
505
506
506
507
508
510
509
511
512
508
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up or servicing.
5. Avoid entanglement with spindle—tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Properly set up machine before starting.
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent rotation.
9. Avoid positioning hands where they could slip into rotating bits.
10. Always remove chuck keys and other tools before starting.
11. Never attempt to slow or stop spindle with hands or tools.
12. Use correct speeds for drilling accessories and workpiece.
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
NOTICE
Do not exceed gearbox oil level
above red dot in center of oil
site glass below.
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVELS BEFORE USING!
DANGER
PANTONE 485 C or RAL 3001
PANTONE 151 C or RAL 2005
WARNING
CAUTION
PANTONE 109 C
GRIZZLY LOGO RED
PANTONE 711C or RAL 3020
COLOR CODES
NOTICE
PANTONE 3005 C or RAL 5005
COPYRIGHT © GRIZZLY INDUSTRIAL, INC.
FOR GRIZZLY MACHINES ONLY! DO NOT REPRODUCE OR CHANGE THIS ARTWORK
WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.
If
artwork changes are required, contact us immediately at manuals@grizzly.com.
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
call (800) 523-4777 or
go to
www.grizzly.com.
WARNING!
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
To reduce the risk of serious injury when using this machine:
1. Read and understand owner’s manual before operating.
2. Always wear approved safety glasses.
3. Only plug power cord into a grounded outlet.
4. Disconnect power before setting up or servicing.
5. Avoid entanglement with spindle—tie back long hair, roll up long
sleeves, and DO NOT wear loose clothing, gloves, or jewelry.
6. Properly set up machine before starting.
7. Keep all guards and covers in place during operation.
8. Clamp workpiece to table to prevent rotation.
9. Avoid positioning hands where they could slip into rotating bits.
10. Always remove chuck keys and other tools before starting.
11. Never attempt to slow or stop spindle with hands or tools.
12. Use correct speeds for drilling accessories and workpiece.
13. Do not operate when tired or under influence of drugs or alcohol.
14. Do not expose to rain or use in wet locations.
15. Prevent unauthorized use by children or untrained users;
restrict access or disable machine when unattended.
NOTICE
Do not exceed gearbox oil level
REFER TO
OWNER’S MANUAL
FOR OIL TYPE AND
AMOUNT.
CHECK OIL
LEVELS BEFORE USING!
DANGER
WARNING
CAUTION
WARNING!
BIOLOGICAL AND
POISON HAZARD!
Use personal protection
when handling coolant.
Immediately clean up
spills.
WARNING!
ENTANGLEMENT
HAZARD!
Tie back long hair, roll up
long sleeves, and remove
loose clothing, jewelry, or
gloves to prevent getting
caught in moving parts.
To reduce risk of death
or serious injury, read
manual BEFORE using
machine.
To get a new manual,
go to
WARNING!
Always wear
ANSI-approved safety
glasses and face shield
when using this
machine.
EYE/FACE INJURY
HAZARD!
REF PART # DESCRIPTION REF PART # DESCRIPTION
501 P0793501 GRIZZLY.COM LABEL 507 P0793507 MACHINE ID LABEL
502 P0793502 STOP OIL FILL TAG 508 P0793508 ELECTRICITY LABEL
503 P0793503 CONTROL PANEL FACEPLATE 509 P0793509 HAZARD WARNING LABEL
504 P0793504 MODEL NUMBER LABEL 510 P0793510 BIOLOGICAL/POISON HAZARD LABEL
505 P0793505 FLUID CAPACITIES LABEL 511 P0793511 ELECTRICITY LABEL
506 P0793506 OIL LEVEL NOTICE 512 P0793512 GRIZZLY GREEN TOUCH-UP PAINT