Grizzly G0736, Руководство пользователя

Страница: 6 / 72

-4-
Model G0736/G0737 (Mfd. Since 3/14)
Locking the bandsaw power switch DOES
NOT disable the welding station functions.
The machine must be disconnected from
power to prevent the use of the welding sta-
tion.
Basic Controls
Use Figures 1–3 and the descriptions below
to become familiar with the basic controls of
the bandsaw before beginning operations. Being
familiar with these controls will help you better
understand the content provided in this manual.
A. Bandsaw Power Switch. Enables/disables
power to the bandsaw motor. Can be dis-
abled and locked with the key.
B. Speed Digital Readout. Displays the cur-
rent blade speed in feet per minute (FPM) of
blade travel.
C. Bandsaw STOP Button. Stops the power
flow to the bandsaw motor. Twist the STOP
button clockwise until it pops out to reset it
and allow the use of the start button.
D. Bandsaw START Button. Starts blade rota-
tion.
E. Blade Shear. Cuts the bandsaw blade when
making internal cuts or making blades from
bulk stock.
F. Welding Power Lamp. Illuminates when
power is enabled to the welding station.
G. Welding Power Switch. Enables/disables
power to the welding station.
H. Anneal Button. Allows the bandsaw blade to
be tempered and cooled in a gradual manner,
giving the weld strength and flexibility.
I. Clamping Pressure Switch. Applies pres-
sure to the cut ends of the bandsaw blade to
ensure a proper weld as the metal melts.
J. Grinding Wheel. Prepares the blade ends
for welding. Removes the weld flash to make
the joint flat on the top and bottom of the
blade.
K. Grinding Wheel Toggle Switch. Starts/
stops the grinding wheel.
L. Welding Spark Guard: Protects the operator
from sparks during the welding operation.
M. Weld Button. Enables power to flow between
the ends of the bandsaw material to form the
weld.
Figure 1. Bandsaw control panel.
A
D
C
B
Figure 2. Welding station controls.
E
F
G
H
M
K
J
I
L