Grizzly G0731, Руководство пользователя

Страница: 30 / 56

-28-
Model G0731 (Mfd. Since 01/17)
Tilting Head Left/Right
1. DISCONNECT MACHINE FROM POWER!
Rotating Turret
1. DISCONNECT MACHINE FROM POWER!
2. Loosen the three hex nuts on the turret (see
Figure 30).
Figure 30. Turret rotation hex nuts (2 of 3
shown).
Turret
Rotation
Scale
3. Rotate the head and turret around the column
to the left or right using the turret rotation
scale to determine the amount of rotation.
4. Re-tighten the three hex nuts to secure the
head and turret in place.
Always lock the turret in place after rotation.
Unexpected movement of the head during
operations could cause the cutter to bind
with the workpiece, resulting in personal
injury, and possible damage to the cutter
and workpiece.
2. Loosen the four hex nuts on both sides of the
turret (see Figure 29).
Figure 29. Head tilting hex nuts (2 of 4 shown).
3. Tilt the head to the left or right and use the
head tilt scale to determine the angle of tilt.
4. Re-tighten the four hex nuts to secure the
head.
Always lock the head in place after adjusting
tilt. Unexpected movement of the head
during operations could cause the cutter
to bind with the workpiece, resulting in
personal injury, and possible damage to the
cutter and workpiece.
Head Tilt
Scale
Hex Nuts
(2 of 4)
Turret Hex Nuts
(2 of 3)