Grizzly G0731, Руководство пользователя

Страница: 35 / 56

Model G0731 (Mfd. Since 01/17)
-33-
SECTION 6: MAINTENANCE
Always disconnect power
to the machine before
performing maintenance.
Failure to do this may
result in serious person-
al injury.
For optimum performance from this machine, this
maintenance schedule must be strictly followed.
Ongoing
To minimize your risk of injury and maintain proper
machine operation, shut down the machine imme-
diately if you ever observe any of the items below,
and fix the problem before continuing operations:
• Loose mounting bolts.
• Worn or damaged tooling.
• Worn or damaged wires.
• Any other unsafe condition.
Every 8 Hours of Operation:
•
Use the one-shot oiler (
Page 34).
• Add oil to the spindle lubrication cup ( Page 34).
• Clean the mill.
Every 40 Hours of Operation:
• Lubricate the vertical bevel gears ( Page 34).
• Lubricate the longitudinal, cross, and vertical
leadscrews (
Page 35).
Note: This maintenance schedule is based on
average usage. Adjust the maintenance schedule
to match your actual usage to keep this mill run-
ning smoothly and to protect your investment.
Schedule
Cleaning &
Protecting
Use a brush and shop vacuum to remove chips
and debris from the mill. Never blow off the mill
with compressed air, as this will force metal chips
deep into the mechanisms and may injure your-
self or bystanders.
Wipe built-up grime from the mill with a rag and a
mild solvent. Remove any rust from the unpainted
cast iron surfaces of this mill, then treat them with
regular applications of products such as Primrose
Armor Plate Way Oil
, G96
®
Gun Treatment,
SLIPIT
®
, or Boeshield
®
T-9 (see Grizzly Catalog
for more details).
Lubrication
This mill has numerous moving metal-to-metal
contacts that require proper lubrication to help
ensure efficient and long-lasting mill operation.
Other than lubrication points covered in this sec-
tion, all other bearings are internally lubricated
and sealed at the factory. Simply leave them
alone unless they need to be replaced.
IMPORTANT: Before adding lubricant, clean
debris and grime from the devices to avoid con-
taminating the new lubrication.
DISCONNECT MACHINE FROM POWER
BEFORE PERFORMING LUBRICATION!
NOTICE
Failure to follow reasonable lubrication
practices as outlined in this manual for your
mill could lead to premature failure of your
mill and will void the warranty.