Grizzly G0731, Руководство пользователя

Страница: 16 / 56

-14-
Model G0731 (Mfd. Since 01/17)
Ground
3
1
4
2
6
Motor Rewired for 220V
Motor Prewired for 110V
6
Ground
4
3 2
5
1
5
Figure 9. Motor configured for 110V operation.
To convert this mill for 220V power, you must re-
wire the motor and install a NEMA 6-15 plug and
receptacle.
Refer to
Page 44 for the full Wiring Diagram.
You MUST disconnect the
mill from the power source
before beginning any of
the following 220V conver-
sion procedures to avoid
serious personal injury or
death by electrocution.
To rewire the motor:
1. Remove the cover of the motor wiring junc-
tion box.
2. Re-configure the motor wiring by removing
wires 1, 2, 3, 4, 5, and 6 from the terminal
block (see
Figure 9).
3. Replace wires 4, 1, and 6 on the terminal
block, as shown in Figure 10.
4. Use the wire nut to secure wires 2, 3, and 5
together, as shown in
Figure 10.
5. Replace the cover of the motor wiring junc-
tion box.
Replacing the Plug
Replace the molded NEMA 5-15 plug with a
NEMA 6-15 by removing the original and install-
ing the new plug according to the manufacturer's
instructions.
Tools/Items Needed Qty
Phillips Head Screwdriver #2 ............................ 1
Wire Nut ............................................................ 1
Ground
3
1
4
2
6
Motor Rewired for 220V
Motor Prewired for 110V
6
Ground
4
3 2
5
1
5
Figure 10. Motor configured for 220V operation.
Covers, guards, and safety devices on
this machine are provided for your safety.
Always keep them secured in place before
connecting the machine to power to avoid
serious personal injury.
Voltage Conversion