Grizzly G0731, Руководство пользователя

Страница: 7 / 56

Model G0731 (Mfd. Since 01/17)
-5-
Table Controls
Figure 4. Knee and cross slide locks, and one-
shot oiler.
O
Q
P
L. Y-Axis Handwheel: Manually moves table
along Y-axis (front and back).
M. Knee Crank: Manually moves table along
Z-axis (up and down).
N. Graduated Dial (X-Axis): Displays X-axis
table movement in 0.001" increments. One
full revolution represents 0.100" of table
travel.
O. One-Shot Oiler: Lubricates table ways.
P. Y-Axis Lock: Tightens to prevent Y-axis
table movement for increased rigidity during
operations when the Y-axis should not move.
Q. Z-Axis Lock: Tightens to prevent Z-axis
table movement for increased rigidity during
operations when the Z-axis should not move.
Figure 3. Table control handwheels and X-axis
locks.
J
I
M
L
K
N
I. X-Axis Handwheel (1 of 2): Manually moves
table along X-axis (left and right).
J. X-Axis Locks: Tighten to prevent X-axis
table movement for increased rigidity during
operations when the X-axis should not move.
K. Graduated Dial (Y-Axis): Displays Y-axis
table movement in 0.001" increments. One
full revolution represents 0.100" of table
travel.
Spindle Direction Switch
Figure 5. Location of spindle direction switch.
R. Spindle Direction Switch: Turns motor ON
in Forward (FWD) or Reverse (REV) direc-
tion. Turns motor
OFF in OFF position.
R