Grizzly G0701 Скачать руководство пользователя страница 84

Страница: 84 / 88

-82-

Model G0701 (Mfd. Since 9/17)

BUY PARTS ONLINE AT GRIZZLY.COM!

Scan QR code to visit our Parts Store.

FOR GRIZZLY MACHINES ONLY!

DO NOT REPRODUCE OR CHANGE THIS ARTWORK

WITHOUT WRITTEN APPROVAL!

Grizzly will not accept labels changed without approval.

artwork changes are required, contact us immediately at

[email protected]

COLOR CODES

GRIZZLY GREEN

PANTONE 586C

G0701 Machine Labels D

(4/10/14)

• 1:1 Sizing (Labels are actual size)

• Labels must be made of oil-resistant material

All labels on this page are NEW or have CHANGED since original sending.

G0701

MODEL G0701

19" ULTIMATE BANDSAW

Motor: 5 HP, 230V, Single-Phase, 60 Hz
Full-Load Amp Draw: 27A
Table Size: 28" x 24"
Blade Speed: 4975 FPM
Blade Length: 166" – 168"
Blade Width Range: 3/8" – 1-3/8"
Max. Cutting Width Left of Blade: 18-3/8"
Max. Cutting Height: 19-1/2"
Table Tilt: 5˚L ⁄ 45˚R
Weight: 717 lbs.

Specifications

Date

Mfd. for Grizzly in Taiwan

WARNING!

To reduce risk of serious injury when using this machine:
  1. Read and understand owner’s manual before operating.
  2.  Never touch moving blade. Keep hands out of blade path.
  3. Always wear approved eye protection and respirator.
  4.  Properly ground machine—connect to permanently grounded
    metal wiring system or an equipment-grounding conductor.
  5.  Only remove jammed cutoff pieces when blade is stopped.
  6.  Use push stick or holding jig to cut small or narrow pieces.
  7.  Disconnect power before changing blades or adjusting saw.
  8.  Maintain adjustment of blade tension, tracking, and guides.
  9.  Keep upper guide adjusted to just clear the workpiece.
10.  Hold workpiece firmly against table to maintain control.
11.  Only run saw with wheel covers closed and all guards in place.
12.  Never reach under table while blade is in motion.
13.  Remove/secure loose clothing and long hair.
14.  DO NOT expose to rain or use in wet locations.
15.  Prevent unauthorized use by children or untrained users;
    restrict access or disable machine when unattended.

GUIDE POST POSITION

DOWN

FOR GRIZZLY MACHINES ONLY!

DO NOT REPRODUCE OR CHANGE THIS ARTWORK

WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.

artwork changes are required, contact us immediately at [email protected].

NOTICE

Do not attempt to move guide post while it is in
locked position. Failure to loosen guide post lock
knob before adjusting guide post position may
result in machine damage.

Note: All labels on this page are NEW or have CHANGED since original sending.

G0701 Labels B

(4/10/14)

• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material

GRIZZLY LOGO RED

PANTONE 711C or RAL 3020

NOTICE

PANTONE 3005 C or RAL 5005

G0701 Labels C

(4/10/14)

• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material

FOR GRIZZLY MACHINES ONLY!

DO NOT REPRODUCE OR CHANGE THIS ARTWORK

WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.

artwork changes are required, contact us immediately at [email protected].

To reduce risk of death

or serious injury, read

manual BEFORE using

machine.
To get a new manual,

call (800) 523-4777 or

go to www.grizzly.com.

WARNING!

EYE/LUNG INJURY

HAZARD!

Always wear safety

glasses and a

respirator when

using this machine.

INJURY/SHOCK

HAZARD!

Disconnect power

before adjustments,

maintenance, or

service.

INJURY HAZARD!

Do not open door
while machine is
connected to power
or blade is in motion.

NOTICE

Before adjusting table angle,
release table lock lever.

NOTICE

Be sure lever is in locked
position before operating saw.

DANGER

PANTONE 485 C or RAL 3001

COLOR CODES

PANTONE 151 C or RAL 2005

WARNING

CAUTION

PANTONE 109 C

NOTICE

PANTONE 3005 C or RAL 5005

Note: All labels on this page are NEW or have CHANGED since original sending.

G0701 Labels C

(4/10/14)

• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material

FOR GRIZZLY MACHINES ONLY!

DO NOT REPRODUCE OR CHANGE THIS ARTWORK

WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.

artwork changes are required, contact us immediately at [email protected].

To reduce risk of death

or serious injury, read

manual BEFORE using

machine.
To get a new manual,

call (800) 523-4777 or

go to www.grizzly.com.

WARNING!

EYE/LUNG INJURY

HAZARD!

Always wear safety

glasses and a

respirator when

using this machine.

INJURY/SHOCK

HAZARD!

Disconnect power

before adjustments,

maintenance, or

service.

INJURY HAZARD!

Do not open door
while machine is
connected to power
or blade is in motion.

NOTICE

Before adjusting table angle,
release table lock lever.

NOTICE

Be sure lever is in locked
position before operating saw.

DANGER

PANTONE 485 C or RAL 3001

COLOR CODES

PANTONE 151 C or RAL 2005

WARNING

CAUTION

PANTONE 109 C

NOTICE

PANTONE 3005 C or RAL 5005

Note: All labels on this page are NEW or have CHANGED since original sending.

G0701 Labels C

(4/10/14)

• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material

FOR GRIZZLY MACHINES ONLY!

DO NOT REPRODUCE OR CHANGE THIS ARTWORK

WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.

artwork changes are required, contact us immediately at [email protected].

To reduce risk of death

or serious injury, read

manual BEFORE using

machine.
To get a new manual,

call (800) 523-4777 or

go to www.grizzly.com.

WARNING!

EYE/LUNG INJURY

HAZARD!

Always wear safety

glasses and a

respirator when

using this machine.

INJURY/SHOCK

HAZARD!

Disconnect power

before adjustments,

maintenance, or

service.

INJURY HAZARD!

Do not open door
while machine is
connected to power
or blade is in motion.

NOTICE

Before adjusting table angle,
release table lock lever.

NOTICE

Be sure lever is in locked
position before operating saw.

DANGER

PANTONE 485 C or RAL 3001

COLOR CODES

PANTONE 151 C or RAL 2005

WARNING

CAUTION

PANTONE 109 C

NOTICE

PANTONE 3005 C or RAL 5005

Note: All labels on this page are NEW or have CHANGED since original sending.

G0701 Labels C

(4/10/14)

• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material

FOR GRIZZLY MACHINES ONLY!

DO NOT REPRODUCE OR CHANGE THIS ARTWORK

WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.

artwork changes are required, contact us immediately at [email protected].

To reduce risk of death

or serious injury, read

manual BEFORE using

machine.
To get a new manual,

call (800) 523-4777 or

go to www.grizzly.com.

WARNING!

EYE/LUNG INJURY

HAZARD!

Always wear safety

glasses and a

respirator when

using this machine.

INJURY/SHOCK

HAZARD!

Disconnect power

before adjustments,

maintenance, or

service.

INJURY HAZARD!

Do not open door
while machine is
connected to power
or blade is in motion.

NOTICE

Before adjusting table angle,
release table lock lever.

NOTICE

Be sure lever is in locked
position before operating saw.

DANGER

PANTONE 485 C or RAL 3001

COLOR CODES

PANTONE 151 C or RAL 2005

WARNING

CAUTION

PANTONE 109 C

NOTICE

PANTONE 3005 C or RAL 5005

Note: All labels on this page are NEW or have CHANGED since original sending.

G0701 Labels C

(4/10/14)

• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material

FOR GRIZZLY MACHINES ONLY!

DO NOT REPRODUCE OR CHANGE THIS ARTWORK

WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.

artwork changes are required, contact us immediately at [email protected].

To reduce risk of death

or serious injury, read

manual BEFORE using

machine.
To get a new manual,

call (800) 523-4777 or

go to www.grizzly.com.

WARNING!

EYE/LUNG INJURY

HAZARD!

Always wear safety

glasses and a

respirator when

using this machine.

INJURY/SHOCK

HAZARD!

Disconnect power

before adjustments,

maintenance, or

service.

INJURY HAZARD!

Do not open door
while machine is
connected to power
or blade is in motion.

NOTICE

Before adjusting table angle,
release table lock lever.

NOTICE

Be sure lever is in locked
position before operating saw.

DANGER

PANTONE 485 C or RAL 3001

COLOR CODES

PANTONE 151 C or RAL 2005

WARNING

CAUTION

PANTONE 109 C

NOTICE

PANTONE 3005 C or RAL 5005

Note: All labels on this page are NEW or have CHANGED since original sending.

FOR GRIZZLY MACHINES ONLY!

DO NOT REPRODUCE OR CHANGE THIS ARTWORK

WITHOUT WRITTEN APPROVAL!

Grizzly will not accept labels changed without approval.

artwork changes are required, contact us immediately at [email protected].

or serious injury, read

manual BEFORE using

machine.
To get a new manual,

call (800) 523-4777 or

go to www.grizzly.com.

WARNING!

EYE/LUNG INJURY

HAZARD!

Always wear safety

glasses and a

respirator when

using this machine.

INJURY/SHOCK

HAZARD!

Disconnect power

before adjustments,

maintenance, or

service.

INJURY HAZARD!

Do not open door
while machine is
connected to power
or blade is in motion.

Before adjusting table angle,
release table lock lever.

NOTICE

Be sure lever is in locked
position before operating saw.

DANGER

PANTONE 485 C or RAL 3001

COLOR CODES

PANTONE 151 C or RAL 2005

WARNING

CAUTION

PANTONE 109 C

NOTICE

PANTONE 3005 C or RAL 5005

G0701 Labels C

(4/10/14)

• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material

FOR GRIZZLY MACHINES ONLY!

DO NOT REPRODUCE OR CHANGE THIS ARTWORK

WITHOUT WRITTEN APPROVAL! Grizzly will not accept labels changed without approval.

artwork changes are required, contact us immediately at [email protected].

To reduce risk of death

or serious injury, read

manual BEFORE using

machine.
To get a new manual,

call (800) 523-4777 or

go to www.grizzly.com.

WARNING!

EYE/LUNG INJURY

HAZARD!

Always wear safety

glasses and a

respirator when

using this machine.

INJURY/SHOCK

HAZARD!

Disconnect power

before adjustments,

maintenance, or

service.

INJURY HAZARD!

Do not open door
while machine is
connected to power
or blade is in motion.

NOTICE

Before adjusting table angle,
release table lock lever.

NOTICE

Be sure lever is in locked
position before operating saw.

DANGER

PANTONE 485 C or RAL 3001

COLOR CODES

PANTONE 151 C or RAL 2005

WARNING

CAUTION

PANTONE 109 C

NOTICE

PANTONE 3005 C or RAL 5005

Note: All labels on this page are NEW or have CHANGED since original sending.

G0636X, G0636XB

Generic Labels

(3/17/14)

• 1:1 Sizing (Labels are
actual size)
• Labels must be made of
oil-resistant material

To reduce risk of death

or serious injury, read

manual BEFORE using

machine.
To get a new manual,

call (800) 523-4777 or

go to www.grizzly.com.

WARNING!

EYE/LUNG INJURY

HAZARD!

Always wear safety

glasses and a

respirator when

using this machine.

INJURY/SHOCK

HAZARD!

Disconnect power

before adjustments,

maintenance, or

service.

INJURY HAZARD!

Do not open door
while machine is
connected to power
or blade is in motion.

NOTICE

Magnetic brake remains engaged
when machine is off. To disengage
brake and avoid unnecessary
power consumption when finished
using saw, turn switch disabling
key to "0".

NOTICE

Before adjusting table angle,
release table lock lever.

NOTICE

Be sure lever is in locked
position before operating saw.

USE MAGNETIC BRAKE NOTICE ONLY ON G0636XB

DANGER

PANTONE 485 C or RAL 3001

COLOR CODES

PANTONE 151 C or RAL 2005

WARNING

Note: All labels on this page are NEW or have CHANGED since original sending.

600V2