Model G0495X (Mfd. Since 07/19)
-21-
SECTION 4: OPERATIONS
Basic Jointer
Controls
This section covers the basic controls used during
routine operations.
START Button: Starts motor only if the STOP
button is popped out.
STOP Button: Disables the START button.
Enable the START button by twisting the STOP
button until it pops out.
POWER Light: Indicates machine is correctly
plugged into the power source.
Figure 14. START/STOP button locations.
POWER
Light
START
Button
STOP
Button
To reduce your risk of
serious injury, read this
entire manual BEFORE
using machine.
To reduce risk of eye injury from flying
chips or lung damage from breathing dust,
always wear safety glasses and a respirator
when operating this machine.
If you are not experienced with this type
of machine, WE STRONGLY RECOMMEND
that you seek additional training outside of
this manual. Read books/magazines or get
formal training before beginning any proj-
ects. Regardless of the content in this sec-
tion, Grizzly Industrial will not be held liable
for accidents caused by lack of training.
