Grizzly G0490W, Руководство пользователя

Страница: 50 / 64

-48-
Model G0490W/G0490XW (Mfd. Since 5/16)
The fence stops simplify the task of adjusting the
fence to 45° inward, 90°, and 45° outward (135°).
Tools Needed Qty
45° Square ........................................................ 1
90° Square ........................................................ 1
Sliding Bevel ...................................................... 1
Wrench 10mm ................................................... 1
Hex Wrench 5mm .............................................. 1
Setting 45° Inward Fence Stop
1. DISCONNECT MACHINE FROM POWER!
2. Pull out and lock tilt plunger (see Figure 83),
loosen fence tilt lock and fence lock, then tilt
fence approximately 45° inward onto stop
cap screw.
Setting Fence Stops
Setting 90° Fence Stop
1. DISCONNECT MACHINE FROM POWER!
2. Pull out and lock tilt plunger and loosen fence
tilt lock (see Figure 85).
Figure 85. Adjusting fence to 90°.
3. Using a 90° square, adjust fence to 90° posi-
tion (see Figure 85), then unlock plunger. It
should insert into indexing ring and lock fence
at 90° position.
4. Adjust indicator (if necessary) to 0° to cali-
brate fence tilt scale.
Setting 45° Outward Fence Stop
1. DISCONNECT MACHINE FROM POWER!
2. Pull out and lock tilt plunger (see Figure 83),
loosen fence tilt lock and fence lock, then tilt
fence against 45° outward stop bolt.
3. Loosen jam nut shown in Figure 86.
Fence Tilt
Scale
Tilt Lock
Plunger
Indexing
Ring
5. Adjust stop cap screw until fence is exactly
45° inward while resting on screw (verify
angle with a 45° square), retighten jam nut,
tilt lock, and fence lock.
Figure 84. Fence adjusted to 45° inward.
4. Loosen jam nut shown in Figure 83.
3. Place 45° square against fence and table,
(see Figure 84).
4. Adjust 45° outward stop bolt until fence is
exactly 45° outward while resting on bolt
(check angle with sliding bevel set to 135°),
then retighten jam and tilt lock.
Figure 86. Fence adjusted 45˚ outward.
Tilt
Plunger
Tilt Lock
Jam Nut
Indicator
Figure 83. 45° inward positive stop cap screw.
Jam Nut
Tilt
Plunger
Tilt Lock
45° Inward
Stop Cap
Screw
45° Outward
Stop Bolt