Grizzly Tools EHS 600-59, Перевод оригинальной инструкции по эксплуатации

Страница: 64 / 128

64
GB
The hedge trimmer is equipped with a
double-sided safety cutter bar. When
cutting, the blades move backwards and
forwards in linear motion. The impact pro-
tection on the tip of the cutter bar prevents
unpleasant recoils should the trimmer
come into contact with walls, fences and
so on.
The unit can only be operated with the
deadman switch depressed, in order to
protect the operator. In addition, the hand
guard protects against branches and bri-
ars.
Please note the following descriptions for
the function of the operating components.
The illustration how to handle the
appliance can be found on page 2.
Overview
1 Power cable
2 Handle
3 ON / OFF switch
4 Strain relief
5 Vents
6 Loop grip with deadman switch
7 Hand protection
8 Safety blade
9 Blade protection
Assembling instructions
Pull out the power plug before car-
rying out any work on the equip-
ment.
Use only original parts.
Scope of delivery
Carefully unpack the appliance and check
that it is complete:
- Hedge trimmer with cutter assembled
- Hand guard + 4 cross-head screws
- Blade guard
- Instruction Manual
Mounting the Hand Protection
Slide the hand protection (7) onto
the equipment and affix the side of
the unit with the two bolts included
in delivery.
Operation
Do not use the equipment with -
out the hand guard. Wear suit -
able clothing and work gloves
when working with the equip -
ment. Ensure that the equipment
is functional before each use.
The On/Off switch and the safety
switch must not be held closed.
They must switch off the motor
when on is released. Should a
switch be damaged, stop work -
ing with the equipment. Ensure
that the mains voltage value
matches the label on the equip -
ment.
Note noise protection and local
specifications. The use of the
equipment on certain days (e.g.
Sundays and national holidays), at
certain times of day (lunch times,
night time quiet periods) or in spe-
cial areas (e.g. health resorts, clin-
ics etc.) is restricted or forbidden.
The blades continue to move for
a while after the equipment is
switched off. Allow the blades to
come to a complete standstill.
Do not touch the moving blades
and do not brake them. Risk of
injury!