3.6 XLR plugs connection
The connection of the XLR 3 poles must be as follows:
pin 1---> function GND (SHIELD)
pin 2---> function SIGNAL -
pin 3---> function
Please make sure the cables are properly connected.
Use shielded cable.
4.0 USE OF THE LANTERN
4.1 Display and control panel use
The led colour indicates the projector mode.
The green led indicates the operating mode.
The red light indicates the setting or the zapping mode.
When the projector is in the operating mode the display indicates the DMX addressing number,
which is 001 the first time you turn it on. Push (SELECT) then (-) or (+) to change the DMX
addressing number. Then press (ENTER) to memorise the required number.
Push (SELECT) twice when you want to activate or zap an option. To memorise it push
(ENTER).
If options are not entered within 15 seconds the projector returns to the operating mode.
4.2 Options
The option is activated.
The option is not activated.
12
