6.0 RESET mode access from a DMX controller
Reset mode can be selected from any standard DMX controller by selecting the second channel
of the unit (Colour Wheel) and positioning between values 4 and 10 for more than 6 seconds.
7.0 MAINTENANCE
All lanterns require regular maintenance to ensure maximum performance and light output.
Please follow these instructions:
- clean lenses, mirrors and dichroics regularly, as even a thin layer of dust can reduce the light
output and scatter the beam;
- replace the lamp if it is damaged or deformed;
- carefully check the electrical connections, particularly the earth connection;
- replace lenses, mirrors and dichroic filters if they are visibly damaged;
- replace all damaged components
CAUTION: clean regularly the fans and the grids. Don't use screw drivers or sharp objects
which may damage the fans or other parts of the lantern.
7.1 Gobo changing
Open the unit head top cover and figure out the gobo you want to change. If it is a fixed gobo
(pict.1) remove it carefully using a screw driver to open at least two of the three fixing splines
(A). Insert the new one and close the splines. If it is a rotating gobo (pict.2) lightly press the
gobo towarads the direction of the arrow until the gobo and the fixing flexible metal ring are
out of the gear housing.
7.2 Rotating gobos lubrication
To ensure a perfect gobo rotation we recommend to lubrica-
te the ball bearings at least every 2 - 4 months.
Use a high-performance lubricating oil only.
See picture 3.
15
pict.1
pict.2
pict.3