12.
Specifications
Note that if any Ah, Wh, or Distance limits are exceeded, then the
calculated values such as Wh/km and average speed will be
incorrect. Be sure to reset after each battery recharge.
CA-DP Connector Pinout :
- 1 -
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
1 = Vbatt (Red)
2 = Ground (Black)
3 = Shunt - (Blue)
4 = Shunt + (White)
5 = Speed (Yellow)
6 = Throttle Over-ride (Green)
22
Voltage Range
10-150V
Voltage Resolution
0.1V
Current Draw
7mA
Current Range
±200 mV/Rshunt. For instance, with a 2m
Ù
sense resistor, the maximum current is 100
amps. With a 0.5m
Ù
resistor, up to 400 amps,
and so forth
Current Resolution
0.01A in low range mode, 0.1A in high range
mode
Current Accuracy
Temperature coefficient and accuracy depend on
the shunt and calibration. With pre-calibrated
Stand Alone model, it is within 2%
±
0.06A
Trip Ah and Wh
Up to 1999 Ah and 19999 Wh in low range
mode, and 10x this in high range mode.
Trip Distance
Up to 1999 km or mi. Odometer rolls over at
99999 km or mi
Wheel Size
0 to 9999 mm
Speed Range
Up to 600 kph or mph. There is an upper limit of
about 500 Hz for the speed sensor input, which
can be increased by removing C6
JST-SM Series Connector