6.
Setup Menu
There are many setup options that can be accessed at any time by
pressing and holding down the left button. Alternately, if only a single
button interface is desired, then holding the right button while power is
applied to the device will also enter the setup menu.
Once entered, navigate through the setup options in the following
manner:
Press
either button briefly to toggle the information at hand.
(like up and down arrow keys)
Hold
the
right
button down for one second to save that information, or
to enter a submenu. (like an enter key)
6.1
Select your units:
The first setup option is to choose between displaying in miles or
kilometers. If you want to change the setting, hold the right button until
_OK appears on the screen. Then pressing either button will toggle
between mi or km, and holding the right button again will save your
selection and move to the next item.
6.2
Setting the wheel size
After units are input, you will be presented with 'Set Wheel' to input the
circumference of the tire. To change this to your actual wheel size,
hold the right button until _OK appears in the bottom right hand corner.
Then the first digit will flash, and you can cycle it through 0-9 with the
left and right buttons. When the correct value appears, hold down the
right button to save it and move on to the next digit.
Hold Left
Button for
2 Seconds
Button
Increments
Selected
Digit
Hold Button
for _OK to
Save and go
to Next Digit
10
Hold Right
Button while
Turning On
or
