Grillo PK 600, Руководство оператора

Страница: 7 / 52

IDENTIFICATION OF THE MACHINE
SERVICING
This handbook provides the instructions for the machine's use. For a correct maintenance contact your Local
Dealer.
WARRANTY
The warranty is subject to the terms and conditions given by the law in force.
You have to keep the warranty registration card handed over the day of the delivery.
SPARE PARTS
Original spares should always be used as these are the only ones which offer safety and interchangeability. Each
order should include the machine serial number and the code of the spare part needed.
For engine spares, refer to the information in the specific manual.
HOW TO ORDER SPARE PARTS
Always state the machine serial number and the code of the spare part needed. Contact our service centers.
PUTTING THE MACHINE INTO SERVICE
1) Make sure the machine is complete and that it has not suffered any damage during transit.
2) Check the levels of the engine oil, the gearbox oil and the radiator liquid.
3) Check the tyre pressure: 23 x 10,50 / 12 8 PR: 2 bar
4) Check the battery voltage, it must not be lass than 12 Volts; recharge if necessary.
If the battery has been supplied dry with separate acid, to put the machine into service proceed as follows:
4.1) Pour in the acid and wait 2 hours; before handling the battery it is compulsory to wear protective
devices such as working gloves and tight-fitting protective goggles.
4.2) Charge the battery with a charger set to 12 Volts on slow charge for 2 hours.
Caution, if this procedure is not observed this could lead to the battery deteriorating and the acid leak during use.
IMPORTANT! Do not invert the battery poles during assembly.
BATTERY – CAUTION!
The gases released by the battery are explosive, so keep it away from naked flames or sparks. Check the level of
the liquid at regular intervals and keep the terminals greased with vaseline or similar.
Useful advice for a longer battery life
In order to avoid to discharge the battery quickly and also to keep it working for a long time, follow these
instructions meticulously:
When the engine is off, do not leave any devices on for a long time (for instance lights, emergency lights, and so
on).
Before carryng out any work on the electrical system unplug the cable of the battery's negative pole.
Tighten the battery terminals well.
Caution. If the battery is kept with a charge lower than 50% for a long time, it is damaged by sulphation, also
reducing the starting ability and performance.
RUNNING-IN
During the running-in period (the first 50 operating hours) do not work wirh the engine at high speed, taking care
not to use more than 80% of the available power.
After the first 20 operating hours and at the end of the running-in period:
Check the thightness of all the fasteners and the connecting units (screws, nuts, fittings).
Check the units, the engine, the gearbox and the pipelines for oil leaks.
Adjust the parking brake.
The vehicle's serial number is marked on the nameplate on
the chassis.
6
2100