Grill'D Soul Stell, Инструкция по установке и эксплуатации

Страница: 23 / 28

23
5.2) Fill the gap between the telescopic and fixed parts with the sealant while compacting
the sealant with an elastic applicator (for example, a rubber one) of a necessary size.
Note: in case the surface of the flue was not properly cleaned of leftover sealant after
application, then it can peel off after hardening and further heating of the heater. Clean with
a plastic brush and waste cloth. Clean after complete cooldown of the heater .
Door
The firebox door can be mounted in
such ways that it will open either to
the right, or to the left.
To do so, it is necessary
1) to unscrew the two bolts that are
holding the door ;
2) choose the door opening direction
and mount the door onto the seat,
fasten ;
3) install the latch as shown in the
figure.
Sealant
Telescopic part
Fixed part
x2
х2
х2
Latch and
screw
In case the door is not tightly fixed in closed position,
the degree of tightening of the latch bolts to be
adjusted.