BAUD RATE
Select the highest Baud Rate whenever
possible. All Transmitters connected to
the network must have the same Baud
Rate.
OUTPUT SIMULATION MODE
Output Simulation controls the RS485 serial output, digital display and signal relay. Use it to test
Transmitter Communication to the remote PC running TFS software and to test Relay set-points.
Simulation values are in percentage of Span.
TO STORE (SAVE) CALIBRATION
Press
Ç
to Store calibration (TFT will display
-
C.S
-
).
Calibration is stored in non-volatile memory (even through power interruptions).
Press
È
to return to NORMAL mode
without
storing any changes.
Page 17
TFT32 Tank Farm Transmitter
Manual Series 2.4
È
Ç
Ç
bd 2
bd 4
bd 19 = 19200
bd 9 = 9600
bd 4 = 4800
bd 2 = 2400
