H84.0.15.6C-01
Operating manual ResOx 5695
Page 17 of 22
_____________________________________________________
_____________________________________________________________________________
13 Alarm
“
AL.
“
There are 3 possible settings:
off
“
AL.OFF
“, on with buzzer “
AL. ON
“, on without buzzer “
AL. NO.SO
“.
Alarm is given in the following cases if alarm active (
ON
or
NO.SO
):
-
Lower alarm boundary (
A 1.LO
) under-run
-
Upper alarm boundary (
A 1.H
,) over-rum.
-
Sensor error.
-
Low battery (
BAT
)
-
Err.7: system error (always with buzzer).
In case of an alarm and when polling the interface the
‚
PRIO
-flag is set in the returned interface message.
14 Real time clock
“
(L0(
“
The real time clock is used for chronological assignment of the logger data and calibration points. Please
check the settings when necessary.
15 Universal output
The output can be used as serial interface (for USB5100 interface converter). If the output is not needed, it is
strongly recommended to deactivate it (
Out oFF
), to lower power consumption. This increases battery life
time.
If the device is used together with interface adapter USB 5100 the device is supplied from the interface
device pin assignment
1: external 5V, 50mA
2: GND
3: TxD/RxD (3.3V Logic)
4: +U
DAC
, analog output
Only suitable adaptor cables are permitted (accessories)!
15.1 Interface
The device can be directly connected to a PC at the USB interface, with an electrically isolated interface
converter USB 5100 (accessory). The transfer takes place via a binary coded format and is protected for
transmission errors, by elaborated security mechanisms.
The following standard software packages are available:
GSOFT3050
:
Operating and evaluation software for the integrated logger function
EBS20M / -60M
:
20-/60-channel software for measuring value display
GMHKonfig
:
Configuration Software (for free on internet)
In case you want to develop your own software, we offer a
GMH3000- development package
including:
a universally applicable Windows functions library ('GMH3000.DLL') with documentation, can be used by
all ‘established’ programming languages, suitable for, Windows XP™,
Windows Vista™, Windows 7™, Windows 8 / 8.1™, Windows 10™
Programming examples Visual Studio 2010 (C#, C++ und VB)
, Testpoint™, LabVIEW™ etc.