H74.0.05.6C-06
Operating Manual GMH 3651
page 18 of 18
16 Specification
Measuring ranges
Oxygen concentration
0.00 ... 70.00 mg/l or ppm
electrochemical sensor GWO 3600
Oxygen saturation
0.0 ... 600.0 % O
2
Oxygen partial pressure 0 ... 1200 hPa O
2
(0.0 .. 427.
5 mmHg)“
Sensor temperature
-5.0 ... + 50.0 °C
NTC 10k (integrated in GWO 3600)
Absolute pressure
300 ... 5000 hPa abs.**)
0 … 40.0 m water column*)
integrated pressure sensor with pressure
port
Accuracy
at 25°C, 1000 hPa abs
Oxygen
±1.5 % of measured value ±0,2 mg/l (0-25 mg/l)
or ±2.5 % of measured value±0,3 mg/l (25-70 mg/l)
Sensor temperature
± 0.1 °C
Accuracy
Absolute pressure
3 hPa or 0.1% of measured value (the higher one to be applied)
Working conditions
20 ... 50 °C; 0 ... 95 % r.H. (not condensing)
Nom. temperature
25°C
Storage temp.
-20 ... 70 °C
Connections
O
2
& temperature
6 pole Mini-DIN Socket
Absolute pressure
Universal pressure port for tubes with 4 or 6mm inner-Ø
Interface /
Analogue output
serial, (3.5mm audio plug),via isolated adapter GRS3100, GRS3105 or
USB3100 (accessories) for PC-USB or RS232- connection, alternatively
selectable: Analogue output 0-1V
external supply
d.c. connector (diameter of internal pin 1.9 mm) for external 10.5-12V
direct voltage supply. (suitable power supply: GNG10/3000)
Oxygen sensor
GWO 3600
Working conditions
0 ... 40 °C
Operating pressure
max. 3 bar
Display
4 digit 7-segment 2 lines, additional segments
Calibration
automatic
1 -, 2- or 3-point calibration,
0%, 100% or ambient air (20.95%) or air saturated water
GLP
calibration storage
adjustable calibration intervals (1 to 365 days, CAL warning after
expiration)
Data logger
Real-time clock
Cyclic: 8000 data sets, cycle time 1s to 60 minutes
Single: 1000 data sets, with measuring point input
Alarm
Buzzer / visual / interface
2 channels: selectable oxygen unit and temperature
Additional functions
Min / max / hold / auto hold
Housing
Break-proof ABS housing
Protection class
Front side IP65
Dimensions L*B*H [mm]
Weight
Without pressure port: 142 x 71 x 26 mm (L x B x H)
approx. 170 g (incl. battery)
Power supply
Current consumption
9V-Battery, Type IEC 6F22 (in scope of supply) or external supply
Ca. 0.6 mA (if Out = Off ca. 0.4mA)
Change battery indicator
Automatic at weak battery
and ’ bAt ’
Auto-Off-Function
Device will be automatically switched off if no key is pressed/no
interface communication takes place for the time of the power-off delay.
The power-off delay can be set to values between 1and 120 min.; it can
be completely deactivated.
EMI
The device corresponds to the essential protection ratings established in the
Regulations of the Council for the Approximation of Legislation for the member
countries regarding electromagnetic compatibility (2004/108/EG). Additional
fault: <1%
*) with accessories, please refer to chapter 7.2.2
**) please note: maximum pressure of GWO 3600 sensor is 3000hPa rel respectively 4000 hPa abs.
17 Reshipment and Disposal
Dispense exhausted batteries at destined gathering places.
This
device must not be disposed as “residual waste”. To dispose this device, please send it
directly to us (adequately stamped). We will dispose it appropriately and environmentally friendly.
DANGER
All devices returned to the manufacturer have to be free of any residual of measuring media and
other hazardous substances. Measuring residuals at housing or sensor may be a risk for persons
or environment
Use an adequate transport package for reshipment, especially for fully functional devices. Please
make sure that the device is protected in the package by enough packing materials.
