GreenWorks Pro 7404702 Скачать руководство пользователя страница 33

Страница: 33 / 44

P0803466-00 v.2.0

MAINTENANCE

• Inspect the blade and replace it or sharpen it, if required (refer to the Maintenance section).

• Store the mower in a dry, clean location. Do not store it next to corrosive materials, such as fertilizer

or rock salt.

• Store the mower indoors, in a cool, dry place, out of the reach of children. Do not cover the lawn

mower with a solid plastic sheet. Plastic coverings trap moisture around the mower, which causes

rust and corrosion.

• Check thoroughly for any worn or damaged parts that need replacing and order them from your

dealer.

• Thoroughly lubricate machine, according to lubrication instructions.

• Fully charge and service the batteries.

•

Do not deflate tires.

• The mower should be stored in a well-ventilated, clean and dry place as the battery charger cannot

be used in a wet environment. Connect the battery charger to the charger port.

• Always keep the batteries fully charged. It is especially important to prevent battery damage

when the temperature is below 32°F (0°C).

• Attach the charger adapter to the charging port and the batteries per the Charging Adapter

section in the Electrical System section.

• Plug the charger into a proper electrical outlet. Refer to Battery Charger, Battery Charging

and Charging Recommendations portions of the Electrical System section for more details on

using the charger and charging the batteries.

• For additional information on battery storage, refer to the Battery Storage portion of the

Electrical System section of this manual.

• To maximize battery life it is best to fully charge batteries shortly after each use.

GET A HEADSTART ON PREPARATION

Before starting the mower following storage, the following servicing is required:

• Clean machine, removing trash and dirt.

• Tighten any loose bolts and make sure all hair pins, cotter pins and clevis pins are in place.

• Install all safety shields and covers and review safety precautions listed in this manual.

•

Check and inflate tires to 10 psi for drive wheels, 46 psi for front caster wheels.

• Close seat pan and reinstall seat pan hardware.

W A R N I N G

Make sure seat pan is securely bolted down prior to each use to prevent seat from moving/tilting in the

event of mower tipping or rollover.

Содержание 7404702













































Результаты поиска

Содержание 7404702

Отзывы:

Похожие инструкции для 7404702

Бренды по названию

Популярные бренды

GreenWorks Pro 7404702, Руководство пользователя

Результаты поиска

Содержание 7404702

Отзывы:

Похожие инструкции для 7404702

Бренды по названию

Популярные бренды