manualshive.com logo in svg

GreenWorks Pro 7404702, Руководство пользователя

Поделиться
Скачать
GreenWorks Pro 7404702 Скачать руководство пользователя страница 25

25

 P0803466-00 v.2.0

Charging Recommendations

W A R N I N G

Do not smoke while servicing the batteries.

W A R N I N G

Always wear safety glasses and protective clothing near battery. Use insulated tools.

•  Lithium Modules do not develop a memory and need not be fully discharged before recharging.

•  Batteries left uncharged will slowly discharge. Before initial use each spring season, be sure batteries 

have a full charge before mowing.

•  It is recommended that the machine be charged once every month during off-season storage. Never 

allow charger to charge more than 15 hours.

•  When charging, be sure charger cooling fan inlet and outlet are not blocked.

Disconnecting the Batteries (LITHIUM MODULES)

W A R N I N G

Only Greenworks dealer or authorized service center can disconnect the battery.

W A R N I N G

ALWAYS disconnect battery cables by pulling inward on RED battery quick disconnect handle in battery 

box compartment before ANY maintenance is performed on mower unit.

W A R N I N G

Can only be operated by distributor!

•  Open battery compartment and lift up battery cover to expose Lithium Modules
•  Grasp RED BATTERY QUICK DISCONNECT HANDLE by wall of mower.
•  Pull INWARD on lever until disengaged from wall plug.
•  Unplug all red battery connectors by grasping each red plug and pull apart. DO NOT PULL ON 

BATTERY CABLES!! ONLY pull on connectors!!

•  Battery may be removed (if needed) by lifting Lithium Module by silver handle on top of each battery 

case.

Reconnecting the Batteries (Lithium Modules)

W A R N I N G

Only Greenworks dealer or authorized service center can connect the battery.

•  Open battery compartment and lift up battery cover to expose Lithium Modules.
•  Grasp RED BATTERY QUICK DISCONNECT LEVER.
•  Push lever OUTWARD into battery compartment wall plug until “CLICK” is heard with complete 

connection. Take unused battery connector to plug into the next battery. Continue connecting batteries 

in a line until ALL batteries are connected to each other and ONLY one connector is left. The last 

unused connector can be used to plug into the internal charging port for charging the battery.

•  Close battery compartment lid and turn lever to close.
•  Mower is ready for use.

ELECTRICAL SYSTEM

Содержание 7404702













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды