manualshive.com logo in svg

GreenWorks Pro 7404702, Руководство пользователя

Поделиться
Скачать
GreenWorks Pro 7404702 Скачать руководство пользователя страница 11

11

 P0803466-00 v.2.0

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this 

product.

SYMBOL

SIGNAL

MEANING

DANGER

Indicates an imminently hazardous situation, which, if not avoided, 

will result in death or serious injury.

WARNING

Indicates a potentially hazardous situation, which, if not avoided, 

could result in death or serious injury.

CAUTION

Indicates a potentially hazardous situation, which, if not avoided, 

may result in minor or moderate injury. 

CAUTION

(Without Safety Alert Symbol) Indicates a situation that may  

result in property damage.

SERVICE

Servicing requires extreme care and knowledge and should be performed only by a qualified service 

technician. For service, we suggest you return the product to your nearest 

AUTHORIZED SERVICE 

CENTER

 for repair. When servicing, use only identical replacement parts.

W A R N I N G

To avoid serious personal injury, do not attempt to use this product until you have read this Owner’s Manual 

thoroughly and understand it completely. If you do not understand the warnings and instructions in this 

Owner’s Manual, do not use this product. Call the toll-free helpline (1-855-470-4267) for assistance.

W A R N I N G

The operation of any power tool can result in foreign objects being thrown into your eyes, 

which can result in severe eye damage. Always wear safety goggles or safety glasses with 

side shields and, when needed, a full face shield. We recommend a Wide Vision Safety 

Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye 

protection which is marked to comply with ANSI Z87.1.

SAVE THESE INSTRUCTIONS

Содержание 7404702













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды