7
Intelligent Radar Level
Transmitter
Programming Menu
-
RD1830 series
Greentech, Korea
www.greentechkor.com E-mail: [email protected]
1.9. Setting
measuring range:
Setting measuring range: In order to get correct measuring result,
measuring range has to be set.
When LCD indicates the menu number 1.8, press button SELECTION to
enter measuring range setting menu. LCD indicates as follows:
MEASURING RANGE SETTING 1.9
00.000m(d)
Press button “OK”, the corresponding parameters turn black, press button
SELECTION or button “+” for setting parameters, then press button OK for
confirmation.
1.10. Dead zone:
Dead zone: When there is a fixed obstacle close to the propagator, it
interferes the measurement, when the maximum medium level cannot be
up to the obstacle, using dead zone setting can avoid measurement
mistake.
When LCD indicates the menu number 1.9, press button SELECTION to
enter dead zone setting menu. LCD indicates as follows:
DEAD ZONE 1.10
0.300m(d)
Press button OK, the corresponding parameters turn black, press button
SELECTION or button “+” for setting parameters, and press button OK for
confirmation.
1.11. Sensor tag:
When LCD indicates the menu 1.10, press button SELECTION to shift the
menu to sensor tag indicating item, LCD indicates as follows:
SENSOR TAG 1.11
SENSOR
