3
Intelligent Radar Level
Transmitter
Programming Menu
-
RD1830 series
Greentech, Korea
www.greentechkor.com E-mail: [email protected]
1. Basic settings
1.1. Low position
adjustment:
Low position adjustment is for measuring range setting.
It determines the proportion of output current linearity corresponding
relationship together with high position adjustment. In main menu, when
the menu number is 1, press button OK, enter the submenu of basic
settings. LCD indicates as follows:
LOW POSITION ADJUSTMENT 1.1
0.00%
35.000m (d)
1.346m (d)
Press button OK, enter programming low position percentage, refer to the
previous stated character/figure parameter editing method in parameter
editing method to edit the percentage value and distance value. After
editing, press button OK for confirmation, or press button ESC for quitting
editing.
1.2. High position
adjustment:
High position adjustment is for measuring range setting. It determines the
proportion of output current linearity corresponding relationship together
with low position adjustment. When LCD indicates the menu number 1.1,
press button SELECTION, enter high position adjustment. LCD indicates
as follows:
HIGH POSITION ADJUSTMENT 1.2
100.00%
0.000m (d)
1.346m (d)
At this time, you can edit the high position adjustment with button OK.
1.3. Medium
properties:
When LCD indicates menu number 1.2, press button SELECTION, enter
medium properties editing. Medium properties menu is for selecting solid,
liquid or micro DK, thus further select material property to some other
factors affect the measurement. LCD indicates as follows:
MEDIUM PROPERTIES 1.3
LIQUID
MEDIUM PROPERTIES 1.3
LIQUID
SOLID MICRO DK
1.3.1
Level quick change:
When select liquid or solid in the medium properties,
press button OK, enter quick
change menu. LCD indicates:
LEVEL QUICK CHANGE 1.3.1
YES
Press button OK again and enter quick change menu. LCD indicates as
follows:
LEVEL QUICK CHANGE 1.3.1
YES
NO
1.3.2.
Select the first wave:
When select liquid or solid in medium properties,
while LCD indicates menu 1.3.1,
press key SELECTION to select the next menu and enter the first wave
selection menu. LCD indicates as follows:
SELECTING THE FIRST WAVE 1.3.2
NORMAL
