4.0 OSD OPERATIONS
(Remarks: PIP function is only available for AWM-1700 and AWM-1900 models.
Introduction
The AWM Sunlight Viewable monitor can be controlled using the On Screen Display
(OSD) menu and/or the 8 buttons on the front bezel of the unit.
The OSD menu enables you to change the way in which your display is set up and is
accessed using the Menu button.
Using the buttons
Each of the 8 buttons on the front bezel of your monitor has a control function.
The menu button and the left and right arrow buttons have miltiple functions.
POWER
Power Button On
To power your monitor ON, press the power button one time. There is a few seconds
delay before the monitor turns on.This delay is part of the monitors protection against
any surge voltage from the engine.
Power Button Off
To power your monitor OFF, press the power button again. The same delay occurs
before powering down.
On AWM-1200 and AWM-1500 this button is "auto reset" button)
14
